Syma X5SC Not working - HELP

[Mike H.]

Basically just the motor wires to the board need soldered on unless they use plugs..the battery wires and antenna are typically already soldered on.

Should be maybe 4 screws holding on the board and thats about it.

 

[Shea Wiesner]

okay i'll pull it apart tomorrow and have a look. maybe post a few pics to see if you can tell me anything from there. Thanks for your help by the way man! I'd be so lost right now otherwise!

 

[Mike H.]

Im just sorry to hear it crapped out on you so quick...They are usually pretty reliable quads.

 

[Shea Wiesner]

Im just sorry to hear it crapped out on you so quick...They are usually pretty reliable quads.

Yeah thats what i heard. Which is why I got it in the first place. I guess they can't all be perfect though. :/

 

[Steve95]

If you just got it & it quit that quick I would consider sending it back. Once you get it going "right", it flies really well.

 

[Shea Wiesner]

Everything seems to be soldered on fine. only thing that I can notice wrong with my limited knowledge is the one screw was already missing.

 

[Quest]

You might want to look and see if that missing screw might be lodged somewhere causing a short.

 

[Shea Wiesner]

You might want to look and see if that missing screw might be lodged somewhere causing a short.

Yeah i did. couldn't find any where