First Attempt at Building a 250

Zealous Orange

Zealous Orange

They see me rollin'
Hello, I am wanting to build my first 250 quad. I have put together a list below. Am I missing anything? Is there something you would include as far as connectors? Thanks!

Parts List
---------
OrangeRx T-SIX 2.4GHz DSM2 Compatible 6CH Transmitter w/10 Model Memory and 3-Pos Switch (Mode 2)
OrangeRx R1020X 10Ch 2.4GHz DSM2/DSMX CompFullRangeRx w/SatDivAnt,F/S&CPPM

HobbyKing FPV250 V4 Blue Ghost Edition LED Night Flyer FPV Quad Copter (Blue) (Kit)
MultiStar & Afro Combo Pack - 2206 Baby Beast Motor and 12A Afro ESC Set of 4 CW/CCW
HobbyKing™ KK-Mini Multi-Rotor Flight Control Board 36x36mm (30.5x30.5mm)
Gemfan Propeller 5x4 Orange (CW/CCW) (2pcs)
Gemfan Propeller 5x4 Black (CW/CCW) (2pcs)
Turnigy nano-tech 1500mah 3S 35~70C Lipo Pack
Turnigy Battery Strap 330mm
HobbyKing™Lipoly Low Voltage Alarm (2s~3s)

HobbyKing™ Cell Checker with Low Voltage Alarm (2S-8S)
IMAX B6AC V2 Professional Balance Charger/Discharger
 
Last edited:
Hi mate looks good your need male servo to servo leads this is to connect to the KK from the receiver
Get loads more props your eat them up fast most snap one or two in a crash the 250 is a fast machine
 
holtneil said:
Hi mate looks good your need male servo to servo leads this is to connect to the KK from the receiver
Get loads more props your eat them up fast most snap one or two in a crash the 250 is a fast machine
Click to expand...
Can you tell me how the battery would connect? I can't determine if I need a power distribution board or a pigtail?
 
I don't know if that receiver will work with that Tx, check accessories on the transmitter's page. It might work, but probably will not have full functionality. Get either a board, or make your own loom with some wire and solder. The power distribution cables are really messy and heavy unless you make your own.
 
Thanks for the info, I'll have a look at the Lemon-Rx, I originally wanted the OrangeRx 6Ch, but they have been out of stock for some time. I thought going a little bigger couldn't hurt anything on the receiver.
 
Hi your right but your still be stuck with 6 channels and on a 250 there is not a lot of space wait till its in your hands its small so its very tight fit ( glad George spotted it )you dont have to get the one I linked your can go for a 6 channel and sat receiver if you so wish but think of where you can mount parts
 
Back
Top