Hi, I've got myself a GepRC TinyGo which I'm loving, fly's straight out the box but 2 wires have come loose off the top board in the stack (black and green). I think they might be related to the SD connector as after inserting SD card it still says there's no card inserted but if I use an old naff card I get an error message 'card low speed' which suggests it's recognised it but not able to record. I cant see where to re-attach them. There are small holes running along the back edge of the SD connector, would they go in to 2 of these holes?
I've looked online, on forums and messaged GepRC but no dice. I tried to attach a picture but it says the file size is too large.
Any help would be greatly appreciated.
Try sharing image with photos.google.com or otherwise resize to upload here (I use a resizer app on my phone to keep from uploading mega images to this site which it then has to resize, wish it accepted larger file sizes in the first place but understand it is a small team or individual even running/paying for this site, passion project mostly). Not sure I can help personally even with the image since never seen one in person but if can get an image up here more likely to have other owners chime in and can tell you where those wires went initially. I wouldn't just go hooking things up since you could be driving voltage/power into something not expecting it or reverse polarity so current flows "backwards" through the components compared with what they were designed for which can fry things.