turnigy sk450

[holtneil]

Hi mate you have the hobby king firmware your better off flashing with Steveis v1.18s1 pro , ues the multirotor flash tool here is the link it will show you what tools you need ,this is the tool your need
http://hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=27990&aff=13680
https://www.google.co.uk/url?sa=t&r...=e3K5k-wTpx9mFucJ8MuUQQ&bvm=bv.80642063,d.ZWU

 

[Johnandrew70]

Thanks for the reply yea i ended up buying this one this morning.
http://www.ebay.co.uk/itm/331202593664?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT

hopefully it wont take too long to get here, getting a bit itchy to get it up in the air my last flight didn't go too well (breaking 2 props) so as soon as the new props come and the flash tool gets here i will be flying i hope !!

 

[holtneil]

Hi mate you have the dead cat frame, i left an answer about the frame on that thread , now you have the tool coming flash with Steveis v1.18s1 pro its so stable ,also if you get the second part of the tool you can then flash the ESCs with simonk firmware
http://www.ebay.co.uk/itm/Atmel-Atm...Control_Parts_Accessories&hash=item3cebf34afc

 

[Johnandrew70]

Hi mate just looked at that cable and it has 10 pins yet the flash tool only has 6 pins?? The Afro ESC's came pre flashed not sure what they are flashed with. Thanks for the replies by the way i could do with all the help i can get

 

[holtneil]

The afro comes with simonk already , well spotted, my flash tool is different it takes both toolshttp://www.dealextreme.com/details.dx/sku.148046~r.24038877
the afro flashes through the jr connector so that flash tool is different again
http://www.hobbyking.com/hobbyking/store/__39437__Afro_ESC_USB_Programming_Tool.html

 

[holtneil]

Hi mate the afro comes with simonk already, my flash tool has the 10 pin so takes both tools
http://www.dealextreme.com/details.dx/sku.148046~r.24038877
The afro has a different flash tool again they use this
http://www.hobbyking.com/hobbyking/store/__39437__Afro_ESC_USB_Programming_Tool.html

 

[Johnandrew70]

thanks for that, if they already come flashed with simonk do i need to flash them?

 

[holtneil]

No mate all done , but if you flashing the kk its worth to get the tool to do ESC for the next multirotor you build , you do know what it does not stop at just one lol