Tinyhawk 2 shaky then loses focus

[_adjm_]

The camera was out of focus after a crash. I’ve taken out the side screws, popped the camera out and adjusted the focus so the camerais clear again.

However after I take off, the picture is shaky and within a few seconds then camera is out of focus again.

Any idea what could be causing this? The quad has taken a bit of a battering! But I’d like to pinpoint what needs replacing is possible!

Thanks in advance

 

[gruvhed]

This video on tightening down the locking ring on lens might be helpful:

Otherwise check the housing again. I kept losing focus on my caddx rattel1 after a bad crash, and noticed a small crack in the paint. Later realized under the paint the whole front housing cracked, and the camera came apart in my hands after taking it out.

Hope it helps!

 

[wafflejock]

Good advice above just adding if the ring is missing or not holding it in focus some bluetac reusable putty stuff would work and is just handy to have.