StewEdwards
New Member
I brought a new Walkera Scout X4 in December 2014.
It has been beset with a number of issues.
We followed the construction details and one action was to extend the gear. That was the last time the gear worked and we have tried every suggestion on the web to get it functioning. We have reduced the torque on the controller, replaced the undercarriage servos, fitted 500ma PICO fuses in the red feed to the servos. We are now told it may be the power pcb or the control board, about £30 and £130 respectively.
Next problem came yesterday when I turned on the battery switch. The led glowed dimly and the 4 green lights illuminated to show a full charge. That was it, no fast flashing red LED leading to a slower flashing red LED to signify binding.
Tried putting in a new battery and exactly the same problem so clearly an eletronic problem.
Any ideas to fix either of the issues on this sick craft
Stew
It has been beset with a number of issues.
We followed the construction details and one action was to extend the gear. That was the last time the gear worked and we have tried every suggestion on the web to get it functioning. We have reduced the torque on the controller, replaced the undercarriage servos, fitted 500ma PICO fuses in the red feed to the servos. We are now told it may be the power pcb or the control board, about £30 and £130 respectively.
Next problem came yesterday when I turned on the battery switch. The led glowed dimly and the 4 green lights illuminated to show a full charge. That was it, no fast flashing red LED leading to a slower flashing red LED to signify binding.
Tried putting in a new battery and exactly the same problem so clearly an eletronic problem.
Any ideas to fix either of the issues on this sick craft
Stew