Quad won't take off, KK2.1.5 browning out? Help

[melchiorvester]

How are you powering the board?

Not exactly sure what you are asking but, battery to PDB to ESC(BEC) to FC

 

[Jackson]

to ESC(BEC) to FC

Are all 4 (red wires) of the ESCs plugged into the KK?

 

[melchiorvester]

Are all 4 (red wires) of the ESCs plugged into the KK?

Yes, That is how I used a kk board on my other builds before without issues

 

[mozquito1]

With the balance lead by the sounds of it.

 

[mozquito1]

Stick with the dual blades as the tri-blades will suck more amps. You could do without that @ the moment.
What do you mean 1704-1900 motors.
What size & make are they?

 

[mozquito1]

How are you powering the board?

Like that other guy powering from the balance plug. Lol

 

[melchiorvester]

Like that other guy powering from the balance plug. Lol

Not powering from the balance lead...

 

[melchiorvester]

Stick with the dual blades as the tri-blades will suck more amps. You could do without that @ the moment.
What do you mean 1704-1900 motors.
What size & make are they?

Multistar 1704

 

[mozquito1]

Esc & prop ratio is OK. I know your not powering that way. But some newb had or was going to wire it that way. This is what would have happened. Cut out or just stuttered on 5v. What KV are they 2700kv?

 

[mozquito1]

Multistar 1704

Oh sorry 1900kv. I'm not with it. I'm working @ moment.