Greg
New Member
Problem: during flight, quad will lose power for a second or less, until yesterday! It has happened a couple of times, but regained power and control. I have flown my quad out at least 100 yds from base without problems before. So yesterday, the quad took off, lost power for a second, recovered, then a minute later, lost all power and dropped out of the sky about 35' to ground. It was about 50' from base. Its not a loss, will require repairs but he can be built better stronger more powerful than...wait, wrong show.
Build: HK Rotorbits quad frame
HK2.1.5 controller (soon to be replaced with APM2.6)
Turnigy DST1200's
Afro 20a ESC's flashed SimonK
Turnigy 9X controller and receiver
Turnigy 4S battery / 3s (occurs when flying with both types of batteries)
Boscam TR1 FPV (all in 1 camera, transmitter and recorder 5Ghz)
Note: I use my 9x controller and receiver on mini quad running Naze 32 without loss of power.
Question: Anyone else experience this same problem?
I'm at a loss as to how to begin trouble shooting the problem. Could be interference from Boscam, problem with the HK flight controller or a bad receiver. I don't have the tools to test.
Your thoughts are most welcome.
Build: HK Rotorbits quad frame
HK2.1.5 controller (soon to be replaced with APM2.6)
Turnigy DST1200's
Afro 20a ESC's flashed SimonK
Turnigy 9X controller and receiver
Turnigy 4S battery / 3s (occurs when flying with both types of batteries)
Boscam TR1 FPV (all in 1 camera, transmitter and recorder 5Ghz)
Note: I use my 9x controller and receiver on mini quad running Naze 32 without loss of power.
Question: Anyone else experience this same problem?
I'm at a loss as to how to begin trouble shooting the problem. Could be interference from Boscam, problem with the HK flight controller or a bad receiver. I don't have the tools to test.
Your thoughts are most welcome.