Project 600-650 mm Quad

GJH105775 said:
Mine runs 1400kv motors and swings 9x 4.7 props. It is not off the ground yet, but I have all on the electronics done. I just need to mount the last three motors and do wire management. Once that happens I''ll be ready for flight.
Click to expand...

Yours , as in you have a Tarot ? Why 1400 motors ?
 
Mine as in Quadcopter, not a Tarrot frame I build mine out of aluminium.

Here is a picture of it.

IMG_1031_zps9inmoyzm.jpg
 
Nothing wrong with that. It looks like a great project.

Glad to see you hardwiring your connections . I learn'd that over many years of RC.

Mine will take a while to build as we have a son in college.

As I stated earlier , I've got to get these Syma X5's learned 100% first.

I appreciate all your feedback as there is a ton of different builds out there.
 
You don't, it is just makes getting power to all of your ESCs neater and easier. If you look at mine you'll see that I just soldered wires into a power distribution harness. in the end I may etch a one out of copper clad PCB. Some of the fancy ones will offer cleaner power (less fluctuation and less RFI/EMI) and even offer a step-down regulator for your FPV setup.
 
Acts as a PBD and 4x25 amp ESCs. I almost bought one, but did not. Also in the third picture (below), it appears to be a Rx or MB. Any idea what it is. I guess it could be power for accessories, but that does not explain the white wire.

$_12.JPG
 
There are some cool budget frames here. The prices vary, but you should at least give them a peek. If you can get free shipping all the better, because it could cut down your shipping from HK.
 
I'm really leaning towards a Naza M flight controller.
If there's an area not to skimp on with this Tarot , I'd guess this would be it.
The Q Brain 25 seems to have good reviews also.
 
GJH105775 said:
T know that you were looking for something a little bigger, but this is an example of what this seller makes. Maybe they'll have something bigger.



Bought something bigger ,,,,,,,,,,,,,,,,,,,,,,,,,, :)

I want to be able to see this thing ,,,, ha ha
Click to expand...
 
I rec'd my Tarot 650 a few weeks ago but havn't even had time to open the box.

Crazy VT winter here with a ton of snow.

I'll probably start with a Q Brain 25x4 and some Tarot 700 kv motors
 
You must log in or register to reply here.
Back
Top