PLEASE HELP - Running into a bit of trouble testing motors

X

X1XnobleX1X

Member
Running into a bit of trouble, and I'm worried!
Connected the motors to ESC and connected it to the power distribution board.
And plugged the signal wire into the Naze32.

Tested the Naze32 - No smoke. - Plugged in the battery no smoke.

Tried testing my motors, via the motor test in Cleanflight, none of the motors spun.

Since, I was following a guide, I plugged in the D4R-II as they had plugged it in first, not sure if the D4R-II is powered, no LED turn on, when holding the F/S button. - Still plugged into computer.

Am I missing something?

PLEASE HELP!

EDIT: Manged to bind the D4R-II to my Taranis, though Roll, pitch, Yaw, Throttle works, but the AUX channels don't move at all for any switch.

Any ideas?




 
ringolong

ringolong

Well-Known Member
Did you calibrate the escs yet? Seems like that has to be completed first from what I remember.

The Taranis will need to be programmed to send signal to the aux channels if you have not done so.
 
X

X1XnobleX1X

Member
ringolong said:
Did you calibrate the escs yet? Seems like that has to be completed first from what I remember.

Thank you for your advice, calibrated all ESCs and all of them worked, which is great!





EDIT: I can get it to arm. But the motors are not spinning at all? HELP!
Click to expand...
 
Last edited:
You must log in or register to reply here.
Top