mynightmare
Member
Hey gang, I started a very similar thread in my introductory post but feel its better to ask question in the correct forum.
First off I have had Hubsan x4 H107l and H107C in the past and enjoyed them. I recently picked up another Hubsan H107l after a couple of years away from my past Hubsan's. Immediately felt the same joy of the faithful Hubsan!! Some how or another I stumbled upon carbon fiber frames and instantly said "Oh I want to build my own quadcopter. Let me start off with I am comfortable with my soldering irons. Also have had my share of 1/8th scale 4x4 brush-less R/C trucks that I have built. I am extremely new to building my first quadcopter.
I do know I want a any where from 95mm - 130mm frame. Thinking 110mm would be a good start? What I don't understand is flashing of (clean flight, beta ect) of the flight control boards and settings. I would like to have L.E.D.s and also have them flash such as the Hubsan when the battery is low. Speaking of flight control boards, I am looking at this on,
http://www.banggood.com/Eachine-FLF...-PPM-6CH-Receiver-p-1091775.html?rmmds=search and for the transmitter this,
http://www.banggood.com/FlySky-FS-i...h-FS-iA6B-Receiver-p-983537.html?rmmds=search.
After countless hours and days of searching and asking I beleave that these two items will work together just fine. Any feed back is welcome here.
I also Know I want 8.5 mm motors and 55mm blades. I am mostly stumped about flashing, program and adding L.E.D.s and making them flash once battery voltage is low.
Any help is extremely grateful!!!
First off I have had Hubsan x4 H107l and H107C in the past and enjoyed them. I recently picked up another Hubsan H107l after a couple of years away from my past Hubsan's. Immediately felt the same joy of the faithful Hubsan!! Some how or another I stumbled upon carbon fiber frames and instantly said "Oh I want to build my own quadcopter. Let me start off with I am comfortable with my soldering irons. Also have had my share of 1/8th scale 4x4 brush-less R/C trucks that I have built. I am extremely new to building my first quadcopter.
I do know I want a any where from 95mm - 130mm frame. Thinking 110mm would be a good start? What I don't understand is flashing of (clean flight, beta ect) of the flight control boards and settings. I would like to have L.E.D.s and also have them flash such as the Hubsan when the battery is low. Speaking of flight control boards, I am looking at this on,
http://www.banggood.com/Eachine-FLF...-PPM-6CH-Receiver-p-1091775.html?rmmds=search and for the transmitter this,
http://www.banggood.com/FlySky-FS-i...h-FS-iA6B-Receiver-p-983537.html?rmmds=search.
After countless hours and days of searching and asking I beleave that these two items will work together just fine. Any feed back is welcome here.
I also Know I want 8.5 mm motors and 55mm blades. I am mostly stumped about flashing, program and adding L.E.D.s and making them flash once battery voltage is low.
Any help is extremely grateful!!!