lol
@Jackson
If I was building a 650 right now I would order the below parts. Keep in mind that it will take some work to keep the props out of view while keeping the gimbal steady.
Do your homework on these parts to figure out what is going to work best for you.
Motors and escs (All 3 of these are very good quality)
1. DJI E600 propulsion system with 12 inch props(plenty of power - best value)
2. DJI E800 propulsion system with 13 inch props(more power)
3. DJI E1200 propulsion system with 17 inch props -
arms extended to 330mm ( A LOT of power, and very efficient)
Gimbal
1. Tarot T4-3D
2. DJI H4-3D (if I went with the A3 fc)
Flight Controller
1. Tarot ZYX-M(very stable with lots of functionality, and very low cost)
2. DJI A3 (I would probably go with this since I have not flown it yet)
Battery
6s 5000mah - 10000mah ( high sierra - probably 6000mah on the 650)
500mm x 10mm carbon fiber tubes for the gimbal
Here is one of my builds with some of these parts so you can see the stability
Here is the same build with the DJI A2 and H3-3d gimbal
Here is someone else's build with 17 inch props. (looks pretty sweet!)
Hope this helps get you started
