Robert Lynch
Active Member
I built a DJI F450 - Naza M V2 w/ GPS, E600 propulsion sys, use a Zippy 30C 4S 8000mAh Lipo; added a landing skid with arms/brackets for fpv and video camera mount. Up till a week ago my flying was without problems.
Had just begun adding FPV equipment - DJI Mini iOSD, Boscam 5.8gz 200mh video TX (using a 3S 30C 800mAh lipo) and a 7" LCD monitor with 5.8 RX built in and dual antenna posts (replaced the standard antennas with a Helical Antenna and cloverleaf for extended coverage) using a
PZ0420 600TVL D-WDR Color Board Camera with OSD Menu DNR for fpv and finally added the GoPro Hero 3+ silver camera for video recording.
Immediately began having loss of control issues, crashing 3 times, usually on descent after reaching an altitude of about 50'.
Have spoken with DJI in CA (tech service) and they want me to send my quad to them. Thought I'd check here first to see if anyone has had similar experiences and what they did about it!
Had just begun adding FPV equipment - DJI Mini iOSD, Boscam 5.8gz 200mh video TX (using a 3S 30C 800mAh lipo) and a 7" LCD monitor with 5.8 RX built in and dual antenna posts (replaced the standard antennas with a Helical Antenna and cloverleaf for extended coverage) using a
PZ0420 600TVL D-WDR Color Board Camera with OSD Menu DNR for fpv and finally added the GoPro Hero 3+ silver camera for video recording.
Immediately began having loss of control issues, crashing 3 times, usually on descent after reaching an altitude of about 50'.
Have spoken with DJI in CA (tech service) and they want me to send my quad to them. Thought I'd check here first to see if anyone has had similar experiences and what they did about it!