Motor identificatn for replacement/other advice.

K

Kenny

New Member
I have a couple of questions but I do need to know how to identify these motors in general... are they marked someplace on the motor itself? I checked but saw nothing.

Anyway, my particular problem. I broke a prop on my new DM104s, replace it, and now that motor doesn't spin. That exact same thing happened with another mini quad, the only 2 I've ever had. First, what is causing the motor to stop working after replacing the prop? Makes no sense the pressure on the shaft when pulling the prop would cause a problem, but that's all I can figure happened.

Also, unless someone can offer advice and it turns out the motor isn't bad after all, can someone please tell me how to identify this motor, and if I can't easily find it cheap on ebay or something, where can i get it? I searched for the motor using the name of the item but no luck on ebay or amazon, so i must be doing something wrong, or it's just not easily available?

Thanks for any help, and I should mention I'm far from knowledgeable on these, not even sure if I reset it properly, as that may be all I need to do.
 
K

Kenny

New Member
OK, very helpful, and thank you.

This motor died in less than a minute of use...i didn't even get a chance to get the feel of flying it, and since the motor was working before I changed the prop and not afterwards, I assumed it was some thing I did in the process of changing the prop. Still it doesn't make sense replacing a prop will kill a motor, so still a mystery to me.

I'll test it for juice then get another motor if need be.
Thanks again.
 
You must log in or register to reply here.
Top