just ordered my falcon

Zentg

Zentg

Well-Known Member
i moved across country (to florida, i knew it was gonna suck when i saw 5 trump bumper stickers in less than 20 minutes in a row and the first one was a dodge truck that cut me off then threw a cigarette out his window at my car) but ive kinda been just in limbo for the last 2 days, feeling lethargic and not really wanting to do anything, and wasn't ordering my falcon cus i didnt feel like spending the money and idk why i just lost interest, but then i randomly took a test about youtube knowledge for people wanting to start youtube channels and got 60% right out of 15 questions then i started getting depressed about how i always do crappy in tests and how college was a living hell for me and how i tried so hard but did terrible in tests and never understood anything the professors were saying during lectures and i took notes and none of the stuff i wrote ended up being relevant on the tests and people just gave me condescending advice my whole life and had to drop out after several semesters of money waseted and how i hate how i really couldn't do anything in life and i am a very smart person but i just dont have what it takes because of natural selection and i didn't make the cut which is why i will never get a girlfriend and couldn't do anything and everyone says i dont try hard enough but they have no idea, but i got really pissed off when i got the 60% on the youtube test so i ordered the v2 quanum goggles, eachine falcon, r832 video receiver, and a 3s battery for the goggles, and whatever happens - happens.
 
Altsickeness

Altsickeness

Quad Addict
Holy crap! Thats one hell of a run-on sentence/rant. :) Hope you like your falcon. Order lots of props or you'll be more depressed when you break them and cant fly anymore.
 
Zentg

Zentg

Well-Known Member
Jackson said:
Pull the tilted motor mounts off the Falcon till you get good. With them it will always be moving forward.
Click to expand...
right on, i heard theres a way to change the PIDS with librepilot so it doesnt pull forward - is that true or do you have to take the motor mounts off? (asking in case i break the motor mounts while trying to take them off lol)
 
Zentg

Zentg

Well-Known Member
RGJameson said:
That makes no sense. So you think reprogramming the Falcon with LibrePilot is easier than removing a few screws?
Click to expand...

It does make sense because with the new setup on the falcons, if you take out the motor tilts the screws are too short to go back in unless you can buy a set of the old screws. Also I am much more skilled with software than I am with working with little screws. And with libre pilot its a simple matter of adding a -10 pitch and can be done in like 2 minutes, rather than try to take out all those screws, potentially breaking something, and not being able to put it back together.
 
RENOV8R

RENOV8R

Well-Known Member
I'd just give my subtrim a couple clicks back. I don't change my settings in Cleanflight according to wind direction every day. But you should have a good selection of screws. I just got 300 3m screws of every length from 5mm to 30mm, still cost me under 10 bucks.
 
Altsickeness

Altsickeness

Quad Addict
RENOV8R said:
I'd just give my subtrim a couple clicks back. I don't change my settings in Cleanflight according to wind direction every day. But you should have a good selection of screws. I just got 300 3m screws of every length from 5mm to 30mm, still cost me under 10 bucks.
Click to expand...
I've found it to be beneficial to have a stock pile of M2, M3 screws, nuts, different length stand offs etc.. it really sucks to lose one little screw and be down for a few days over it. Of course I crashed so much for awhile that I was fixing and buying stuff more then flying. Now I can finally fly more and If I do crash I have stuff to repair it and get back out in the air.
 
You must log in or register to reply here.
Top