I need help with my parts!

[Rauland1]

Hello, I want to build a quadcopter and I need some help with the parts. Can you tell me if they are good and if they are going to work in this combination.

FC: http://www.hobbyking.com/hobbyking/...ntrol_Board_With_6050MPU_And_Atmel_644PA.html

Frame: http://www.hobbyking.com/hobbyking/...SK450_Glass_Fiber_Quadcopter_Frame_450mm.html

Motor:http://www.hobbyking.com/hobbyking/store/__19611__NTM_Prop_Drive_28_36_750KV_265W.html

Prop:http://www.hobbyking.com/hobbyking/store/__25820__10x4_5_SF_Props_2pc_CW_2pc_CCW_Green_.html

ESC:http://www.hobbyking.com/hobbyking/store/__15202__Hobby_King_20A_ESC_3A_UBEC.html

Battery: http://www.hobbyking.com/hobbyking/store/__11952__Turnigy_nano_tech_2200mah_4S_45_90C_Lipo_Pack.html

Radio:http://www.hobbyking.com/hobbyking/..._Module_8ch_Receiver_Mode_2_v2_Firmware_.html

Do you have any suggestions? Thank you in advance!

 

[GJH105775]

I would suggest a bit bigger battery, non NTM motors (bearing problems), and a bit better frame, as this is not as upgradable. If this is the frame you want I'd suggest 12x3.3 props for those motors, but if you want 10'' maybe 1000kv motors.