I need help for my new drone

A

AdrY89

Member
Hello people, I got the urge to build me my first drone.

I have a walkera 250 and now I have the desire to build me a drone everything alone.


I made a list of everything I need and I wanted to know who is responsible if what I choose is fine and if possibly, I need nothing else.


Objects in my possession at the time

Propellers

I have DEVO 7 (the walkera)

Two lipo from 2800 to 30c

One lipo from 2200 to 25c

Skyzone v2 40CH


Objects I need


SM-ZMR250-250MM-Carbon-Fiber-Frame-Kit-with-5mm

Frame like this and aesthetically looks very durable


Matek-LED-POWER-HUB-5in1-V3-Power-Supply-Board-BEC-5V-12V-Low-Voltage-Alarm-Tracker

Power board seems very complete and has reeds the buzzer for a low voltage, or if you lose your drone


Emax-Skyline32OSD-Skyline32-Advanced-Flight-Controller-with-OSD

Fc seems to have everything and a fair price; I would like to play around by setting the various modes

This has compass and cheat over support for GPS and the OSD on the screen


EMAX-BLHeli-Series-20A-ESC

How esc I chose four of these, they should also have the right as an one-shot technology? Amper 20 with support 3 to 4-cell battery



Eachine-Falcon-250-2204-2300KV-CW-CCW-Motor

How 2300kW engine with support 3 to 4-cell battery


Eachine-800tvl-CCD-110-Degree-FPV-Camera-lens-w-5_8G-600mW-Transmitter

This is the camera, 800 line horizontal and take it in PAL format so that you have more vertical lines.


Walkera-HM-DEVO-RX1002-W-Devention-10CH-2_4GHz-Receiver-White

As this receiver has 10 channels, my question is written, which is compatible with the devo 10 but I have the 7. Is it compatible?


Obviously, I know if you will use only six channels instead of 10, right.


As needed to mount thing it is that I cannot do without, and that I need?

Type a welder? Which?

The wire that thick?

What other material do I need?


Moreover, this GPS is compatible with my FC?

N32-GPS-For-Mini-NAZE32-Flight-Controller


Eventually I would like to build me a nice drone with many functions, durable. With the possibility of including batteries 3-4 cells and also put the GPS and be able to connect it to your cell or tablet with Android.

Thanks in advance for all the advice
 
GJH105775

GJH105775

Off and on
Moderator
Are you translating this or do you speak English?

To fly a quadcopter you onlt need 4 channels, others are for auxiliary things like enabling self-leveling and acro.

It is pretty unusual for a GPS to be on a quad with 2300 kv motors, so are you planning for a smaller racing quad or more of a camera platform?

You don't need a welder, but a cheap soldering setup is almost a must. I'd like to first ask what you are looking to spend before giving you suggestions so that I can better narrow it down.

The ESCs you choose depend on your motors, are you sure those motors are going to need 20 amps? If not you might get some smaller ESCs to save on weight. Make sure to get 3S-4S ESCs if you get 3S-4S motors that way you can fly with a 4S battery if you end up wanting to.
 
A

AdrY89

Member
Forgive my bad English, but I helped with Google translator.

I would like to make a drone fpv, the GPS was a nice thing to assemble that when I wanted I could stabilize the drone and then cost 10 euro .

My budget is about 230 dollars 200 euro.

Esc and motors I am informed, the ones I have chosen support 3 or 4 cells and the arrival engines to a high of 18 A with a 4S and so I chose the ones from 20 A.

The frame I really like this the ZMR 250 that the arms 5 mm.

http://www.banggood.com/Robotcat-27...g-Frame-Kit-for-Mini-Quacopter-p-1010731.html

Alternatively too, but it is not available at the time.
 
A

AdrY89

Member
Hi guy tomorrow i star to built my quadcopter,
any question, there is a image take fron rc group fot mout the fpv sistem
wiring-osd.jpg
can i mount in this mode?
wiring-osd 1.jpg
 
A

AdrY89

Member
GJH105775 said:
As long as the flight controller is being grounded then no reason you can't. I suspect you will be using the power as the common grounds.
Click to expand...

Perfect, thanks for answer

I cut the wire of signal of Eachine 800tvl and solder on v in e v out

The power of Eachine 800tvl I take from bec 12 v from Power board

The ground of Eachine 800tvl I left without solder as plugged the cam and the tx
 
A

AdrY89

Member
Hello people

I have

Esc emax 20a blheli

I try to connect

FC to pc with the esc connect to the FC

I open BLHeliSuite click on connect e then on read but the program give me error and not work.

I would update the firmware and to put the one-shot operative

Someone can help me.
 
A

AdrY89

Member
I have activated oneshot 125 with cleanflight
but i do not go on BLHeliSuite for read the esc? Someone know what i do for read the esc and flash the last firmware?
 
A

AdrY89

Member
Good evening, for have to a tidy configuration, can I plug the all esc on a single socket of ESC on PB?

Give One socket enough current for four esc under stress?

Then, on the bec by 12v, can I plug the cam+vtx and four led by 12 volt each one?

Every exit have 12 volt or is split?

ESC.jpg
 
A

AdrY89

Member
Hello boys

I'm mounting the receiver on drone

I have a Taranis-e

With receiver x6r

(Mounted in PWM goes ... )

So ...

Connect the receiver to the socket sbus sklyline32 to the first channel

I go to put the port enables SerialX in UART 2

Then I go to receiver mode configuration, and put on SBus

And serial receiver provider of system bus ...

But not work

Does anyone have any advice ?
 

Attachments

  • 32.jpg
    32.jpg
    62 KB · Views: 2
You must log in or register to reply here.
Top