Hubsan X4 H107L replacement props

[MetalHead88]

So after a bunch of flights, and a couple destroyed and lost propellers, I'm out of a full set of the original propellers that came with the drone.

I purchased these on eBay http://www.ebay.com/itm/231945449734?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I figured even though they were super cheap, they would still work.

Wrong. They are horrible. The whole drone vibrates, lift is noticeably missing, flips cause the drone to crash, there is a noticeable loss of control, and flight time is cut in half.

So the question is - where can I get the original props for a good price? (or good replacements)

On hubsans website I found 4 props for the new H107c (I think they are the same props) for $6.66. Is this my best bet?

Thanks.

 

[rosco11]

Because it has to be the props and not a damaged motor, missing foot pad, bent shell, broken or cracked motor arm or anything else that might have happened while you were destroying the props.

Can get an entire rebuilt kit that includes another shell, 2 extra motors, and two more sets of props for about 20 bucks on e-bay. Can get the whole quad for about 30 bucks. By the time you go through your second or third, your flying will improve to the point you move up to a larger quad. Ask me how i know. Just buy another quad, it is probably not the props, and 30 bucks or so is more reasonable to me than learning how to micro solder. i'm lazy like that.

 

[MetalHead88]

Because it has to be the props and not a damaged motor, missing foot pad, bent shell, broken or cracked motor arm or anything else that might have happened while you were destroying the props.

Can get an entire rebuilt kit that includes another shell, 2 extra motors, and two more sets of props for about 20 bucks on e-bay. Can get the whole quad for about 30 bucks. By the time you go through your second or third, your flying will improve to the point you move up to a larger quad. Ask me how i know. Just buy another quad, it is probably not the props, and 30 bucks or so is more reasonable to me than learning how to micro solder. i'm lazy like that.

Thanks for the input, but it was certainly the props. I found good replacement props on massiverc, and I'm back in business. The quad is back to flying the way it was out of the box.

I knew it was the props because the second that I changed them, it just became a horrible quad. It was flying fine with the original props, but one would fly off mid flight almost every time.