vonKlutch
Well-Known Member
Hello there community,
I recently got my Hubsan in the mail, (took like the full 30 days to ship to me, absolutely rediculous but thats a story for another time)
Over the few days I've had it to practice, i've done several battery charges.
My routine is to fly it untill it starts flashing and then basically hover and practice untill it loses the power to stay in the air, then i disconnect and add it to the pile. when I have 6 dead batteries I plug it in and start charging.
My concern is, I have my charger plugged into a power block that you would use to charge a cellphone or in this case I think this one is the one that i got to run my LattePanda single board computer.
but The lights keep flickering, i'm having a hard time getting solid lights to show charging, and everything is getting rather hot. I mean its not like its going to burn down my house hot, but its all very hot. I'm wondering if i'm using the wrong power source or something?
now I dont know if i've been charging all the way or bumping the cable and showing them as all charged now the lights are off. so I've decided to charge them all individually to get them all full to try and start again.
Should I be worried? I really dont want to be charging these damn things individually thats a waste of time since i'm running 7 batteries. would much rather use the multi charger, i just dont want to roast anything.
This is the charger I'm running, i'm sure more than a few of you have this one.
https://www.amazon.com/BTG-Upgrade-...id=1466260151&sr=8-12&keywords=hubsan+x4+107c
I recently got my Hubsan in the mail, (took like the full 30 days to ship to me, absolutely rediculous but thats a story for another time)
Over the few days I've had it to practice, i've done several battery charges.
My routine is to fly it untill it starts flashing and then basically hover and practice untill it loses the power to stay in the air, then i disconnect and add it to the pile. when I have 6 dead batteries I plug it in and start charging.
My concern is, I have my charger plugged into a power block that you would use to charge a cellphone or in this case I think this one is the one that i got to run my LattePanda single board computer.
but The lights keep flickering, i'm having a hard time getting solid lights to show charging, and everything is getting rather hot. I mean its not like its going to burn down my house hot, but its all very hot. I'm wondering if i'm using the wrong power source or something?
now I dont know if i've been charging all the way or bumping the cable and showing them as all charged now the lights are off. so I've decided to charge them all individually to get them all full to try and start again.
Should I be worried? I really dont want to be charging these damn things individually thats a waste of time since i'm running 7 batteries. would much rather use the multi charger, i just dont want to roast anything.
This is the charger I'm running, i'm sure more than a few of you have this one.
https://www.amazon.com/BTG-Upgrade-...id=1466260151&sr=8-12&keywords=hubsan+x4+107c