Hubsan 501s transmitter

[Matt j harro]

Hi everyone. After receiving a cracked screen on the transmitter that came with my Hubsan 501s I asked Banggood to send me a new one which they did.
I don't know how to bind/calibrate the new transmitter with the quadcopter, please help, many thanks, Matt. (The original damaged transmitter binds straight away without a problem)

 

[dlbeattie]

You can do the update on firmware and they will show how to bind/calibrate.
http://shop.hubsan.com/index.php?main_page=support&zenid=7cf695su0kv6unah3rrb6heni5

 

[Matt j harro]

You can do the update on firmware and they will show how to bind/calibrate.
http://shop.hubsan.com/index.php?main_page=support&zenid=7cf695su0kv6unah3rrb6heni5

Thanks dlbeattie

 

[holtneil]

Hi mate this may help

 

[Matt j harro]

Thanks holtneil. I've just managed to get hold of the section of the instructions that came with the quad. It's exactly what you just linked to. Really appreciate the help had I not got that page I would never have found this. Thanks again, Matt.

 

[holtneil]

No problem let us know how you get on

 

[Matt j harro]

Hi again. I managed to get it all working, yay. I've since tried to start my 501 again and after calibration etc it won't start. So i basically don't get any flashing lights underneath after calibration. (also no GPS but that could be because I'm inside the house.

 

[holtneil]

Hi mate never arm GPS in doors , if the quad goes in to return home mode it will try and go to its last known GPS lock which may be miles away and will trash the room to get there

 

[Matt j harro]

I'd taken the props off first, thanks anyway

 

[dlbeattie]

It sounds like the transmitter is not binding with the drone. Did you do the firmware upgrade?