Evaken
New Member
Hi all,
I've recently started building a micro quad using parts from Hobbyking.
I did some initial research and chose parts initially by basing them off the pixxxy drone on Thingiverse, and then through a discussino with a bloke from Hobbyking.
I've followed Benedikt Haak's setup tutorial video, but can't seem to get the thing working.
I'm using a MicroMWC control board from hobbyking, it is a DSM2 board, has built in ESC's etc.
I've uploaded microwii 2.3, and am using microwii conf to view real time data and upload settings/firmware but the real time data doesnt seem to make sense, and I'm struggling to get it working. Initially I suspected the polarity on two of my motors was backwards, but there are definitely other problems too.
I am controlling it with a TGY9X with an OrangeRX DSM2 module.
Here is a video of the problem so far.
Any help will be appreciated.
I've recently started building a micro quad using parts from Hobbyking.
I did some initial research and chose parts initially by basing them off the pixxxy drone on Thingiverse, and then through a discussino with a bloke from Hobbyking.
I've followed Benedikt Haak's setup tutorial video, but can't seem to get the thing working.
I'm using a MicroMWC control board from hobbyking, it is a DSM2 board, has built in ESC's etc.
I've uploaded microwii 2.3, and am using microwii conf to view real time data and upload settings/firmware but the real time data doesnt seem to make sense, and I'm struggling to get it working. Initially I suspected the polarity on two of my motors was backwards, but there are definitely other problems too.
I am controlling it with a TGY9X with an OrangeRX DSM2 module.
Here is a video of the problem so far.
Any help will be appreciated.