good cheap transmitter/reciever

[berto1230781]

Hi guys what's a good cheap 8 to 9 channel transmitter/reciever combo with 3 way switch? I'm building a x650f with amp 2.6. that way I can setup for loiter/ATI/ and rtl also I would like to setup failsafe so it will rtl when signal loss. I currently have a flysky t6 sitting in the closet buts it's only a 6 channel

 

[holtneil]

Hi mate most go for the turnigy x9pro

 

[berto1230781]

Thanks for the reply. . Is there anything else cheaper this is my first quad and kinda wanna keep everything low. I know I'm asking for too much haha thanks again

 

[holtneil]

I dont think so in the 9 channel range , look at the Devo 10 thats ment to be ok , a bit harder to set up so I am told but quads are set up as aero on the transmitter so you just need to make sure you can assign channels and switches

 

[berto1230781]

Oh ok. How many channels would I need to run a quadcopter and to have the options of rtl, loiter, altitude hold

 

[holtneil]

Hi your need 4 basic channels for quad the rest depend on FCB and switches are they 3 way or 2 way if you go for 9 or more you should be ok
What I do is say you looking at the DEVO 10 , search for the manual on that transmitter and read it and see how it sets ups and how you can program switches etc this helps alot , if you can get the best for your money you want need to change it later on and waste money , I have the DX9 its so easy to set up but is not cheap