FPV Frustration...

Paul Wood

Paul Wood

New Member
I've got a non-functioning FPV system and can't seem to pin it down. It consists of...
  1. TS832 transmitter - worked previously
  2. TS5823 - not known working
  3. Eachine VR-007 - not known working
  4. Xiaomi Yi Camera - worked previously
  5. Sony FPV camera - not know working
I had the whole system working with an EasyCap adapter on my phone using EasyCap Viewer. Then it stopped working and because the light on the EasyCap was not lit I assumed it had expired.

So, I bought a VR-007 expecting that to just hook in to the transmitter signal and all to be well. But, that doesn't get a signal either. So, I bought a TS5823 to rule out a transmitter problem. Still no hook up with the VR-007.

I've no idea if the Sony FPV camera works so despite having tried it with both transmitters I can't tell if there's a problem with the Yi output.

All very frustrating. Ideally what I need is a known working system to test the VR-007 as working and then go through the other components to test for functionality. I live between Guildford, Farnham and Aldershot and wondered if there's anyone out there who would help me to diagnose the fault?
 
Wildwelder

Wildwelder

Well-Known Member
Make sure you're vtx and rx are on the same frequency. I mean there's not many parts involved in fpv. Also make sure your voltage is correct for your camera.
 
You must log in or register to reply here.
Top