DIY Drone
Active Member
http://www.ebay.com/itm/-/121816487461?roken=cUgayN
Custom Built 430 x copter w/ landing gear (ARF) just add your receiver and favorite radio. – Ready to ship!
For sale is a custom designed, and custom built folding drone cut by a CNC machine in ¼” acrylic. The drone is designed after the 430 mm class. The drone folds for easy transportation. The dimensions when folded are 12” x 16 ½” x 6 ¾”. The total weight of this drone is 1600 grams with the 4s lipo. With the removal of some screws and wing nuts you can carry this anywhere. Extend the arms and the legs secure them with the supplied hardware and your set to video, casual fly or night fly.
Specifications:
·Center to Center of motor is 430
·Weight with a 4s lipo ~1600 grams
·Propellers 8045
·Brushless motor Turnigy Mulitstar 2126-880kv 14 pole outrunner
·Afro 20 amp built in BEC.
·Power distribution (rewired for this particular model)
·Orange Rx Dsm2/Dsmx compatible 6 channel 2.4 ghz
·Hk 22.1 flight control board (updated with the 1.9 stevis firmware)
·All the hardware and pre installed wiring.
·Custom made aluminum studs with brass knurled ca glued in.
·Fiberglass land gear (black)
·PCB wired 11.1 leds lights two red and two green.
Items you will need to fly:
·6 channel radio dsm2 compatible
·3s-4s lipo 1500- 4000
·balancer charger
The led’s’ are wired into the balancer plug for the lipo. I used a 4 pin for the 4s 4000 lipo in these pictures. You may have to get a 3 pin if you go to a smaller lipo. This would either have to be re-soldered in or a connector between the two.
This drone was has been tested as the videos will show along with the pictures.
Due to the nature of this hobby I can offer any returns. Please ask me any questions about this before you place your order. Even though this drone is shown flying, it is suggested you learn how to fly a drone with a simulator or an instructor before trying something this big
Custom Built 430 x copter w/ landing gear (ARF) just add your receiver and favorite radio. – Ready to ship!
For sale is a custom designed, and custom built folding drone cut by a CNC machine in ¼” acrylic. The drone is designed after the 430 mm class. The drone folds for easy transportation. The dimensions when folded are 12” x 16 ½” x 6 ¾”. The total weight of this drone is 1600 grams with the 4s lipo. With the removal of some screws and wing nuts you can carry this anywhere. Extend the arms and the legs secure them with the supplied hardware and your set to video, casual fly or night fly.
Specifications:
·Center to Center of motor is 430
·Weight with a 4s lipo ~1600 grams
·Propellers 8045
·Brushless motor Turnigy Mulitstar 2126-880kv 14 pole outrunner
·Afro 20 amp built in BEC.
·Power distribution (rewired for this particular model)
·Orange Rx Dsm2/Dsmx compatible 6 channel 2.4 ghz
·Hk 22.1 flight control board (updated with the 1.9 stevis firmware)
·All the hardware and pre installed wiring.
·Custom made aluminum studs with brass knurled ca glued in.
·Fiberglass land gear (black)
·PCB wired 11.1 leds lights two red and two green.
Items you will need to fly:
·6 channel radio dsm2 compatible
·3s-4s lipo 1500- 4000
·balancer charger
The led’s’ are wired into the balancer plug for the lipo. I used a 4 pin for the 4s 4000 lipo in these pictures. You may have to get a 3 pin if you go to a smaller lipo. This would either have to be re-soldered in or a connector between the two.
This drone was has been tested as the videos will show along with the pictures.
Due to the nature of this hobby I can offer any returns. Please ask me any questions about this before you place your order. Even though this drone is shown flying, it is suggested you learn how to fly a drone with a simulator or an instructor before trying something this big