First timer and my build

Discussion in 'First Build' started by dchris0106, Mar 20, 2017.

  1. dchris0106

    dchris0106 Member

    Hey everyone have some awesome help from a member and this is what I Have so far for my build. Everything is ordered as of now. I wanted the tiger f40 pro motors but wanted to cut costs and the red bottoms are a good choice from what research I did.
    I'm going to play around before I order everything else for fpv. Deciding on a foxeer or runcam camera.
    Any advice is welcomed.
    1x space one 220x frame
    1xBrainFPV RE1 F4 Flight Controller w/ OSD
    1xRadiolink AT9S 2.4GHz 9 Channel Transmitter Radio With R9DS Receiver
    1xEV-Peak E4 50W 4Amp LiPO Battery Balance Charger
    1xRadiolink R6DS 6-CH S.BUS 2.4GHz DSSS Receiver
    1x1-8S Lipo Battery Voltage Tester / Low Voltage Buzzer Alarm
    1xLumenier 1300mAh 4s 75c Lipo Battery (XT60)
    4 x DYS - XSD30A ESC - support Dshot (DYS-XSD30A)
    1 x BrainFPV Mini Power Board (mPB) (BFPV-mPB)
    4 x EMAX - RS2205-S Race Spec - 2300KV (RS2205-S 2300KV)
    3 x Direct Drive HQ Prop - Glass Fiber - 5x4x3 Black
    Last edited: Mar 20, 2017
  2. dchris0106

    dchris0106 Member

    All my parts except my frame have arrived. Should be here this coming week.
  3. Gyro Doctor

    Gyro Doctor Electronics Tech for over 45 years

    Welcome aboard ! :)

    It seems that you're off to a good start, that's for sure, but that's going to be one FAST quad :eek:

    Hope you've already got some flying experience ;)
  4. dchris0106

    dchris0106 Member

    I plan to by a micro for some practice, but I'm not taking this hobby off to quick nice and slow for this guy in the mean
    Gyro Doctor likes this.
  5. dchris0106

    dchris0106 Member

    Well it looks like I forgot one component to get me flying. Need to order the female connector and wire that will connect to the

Share This Page