Hey, I'm building a quadcopter for my school project. I got all my materials ready. But my teacher asked me to find the right screw thread that will be used to mount the motors on the plywood (frame). This is the link to the type of motors I have:
http://www.hobbyking.com/mobile/viewproduct.asp?idproduct=72506
BTW the diameter of the screw is 0.26 inches, I haven't dicided the length yet. But I'll do that after I find what the thread is.
---- All red text is edited by a moderator in order to help user ----
hey i got my battery selected, i'll be using this one:
http://www.nghobbies.com/cart/index...ath=1_10_17_180&products_id=1222#.VlNueXarTIU
i want to know how to connect a voltage regulator to a power distribution board.
Yesha 11/23/15
http://www.hobbyking.com/hobbyking/...s_2_Motors_.html?strSearch=multistar elite 23
These are the motors i'm using.
http://www.hobbyking.com/hobbyking/...Heli_Multi_rotor_Brushless_ESC_2_6S_V2_0.html
and these are the electronic speed controllers i'm using.
I want to know what type of battery and how much mAh i will need to support these electronics and my quadcopter to take flight.
My teacher said it probably won't use 30 amps completely, because i'm not racing it, it made to only hover and take flight. My teacher said probably 75% of amps will be used in the process. So since there are 4 ESCs and each are 30 amps, in total that's 120 amps, and 75% of that will be 90 amps. So i need a battery that can support 90 amps.
Yesha, 11/4/2015
Hi, it's my first time building a quadcopter, and each of my electronic speed are 30 amps, and i need a battery that can support 120 amps in total, so the battery you mentioned, is it good for my quadcopter to maintain flight? and for how long can it stay in flight?
Yesha, 11/3/2015
http://www.hobbyking.com/mobile/viewproduct.asp?idproduct=72506
BTW the diameter of the screw is 0.26 inches, I haven't dicided the length yet. But I'll do that after I find what the thread is.
---- All red text is edited by a moderator in order to help user ----
hey i got my battery selected, i'll be using this one:
http://www.nghobbies.com/cart/index...ath=1_10_17_180&products_id=1222#.VlNueXarTIU
i want to know how to connect a voltage regulator to a power distribution board.
Yesha 11/23/15
http://www.hobbyking.com/hobbyking/...s_2_Motors_.html?strSearch=multistar elite 23
These are the motors i'm using.
http://www.hobbyking.com/hobbyking/...Heli_Multi_rotor_Brushless_ESC_2_6S_V2_0.html
and these are the electronic speed controllers i'm using.
I want to know what type of battery and how much mAh i will need to support these electronics and my quadcopter to take flight.
My teacher said it probably won't use 30 amps completely, because i'm not racing it, it made to only hover and take flight. My teacher said probably 75% of amps will be used in the process. So since there are 4 ESCs and each are 30 amps, in total that's 120 amps, and 75% of that will be 90 amps. So i need a battery that can support 90 amps.
Yesha, 11/4/2015
Hi, it's my first time building a quadcopter, and each of my electronic speed are 30 amps, and i need a battery that can support 120 amps in total, so the battery you mentioned, is it good for my quadcopter to maintain flight? and for how long can it stay in flight?
Yesha, 11/3/2015
Last edited by a moderator:
