Dejan
New Member
Hello,
My Quantum Nova is unusable - one of its ESCs just keeps beeping and it is not possible to arm motors. This is PNF version, trying to connect it with Turnigy TGY-iA10 receiver and Turnigy TGY-i10 radio. So, just added receiver, nothing else has been changed - all other parts and firmware are intact (stock version).
Both, receiver and radio function correctly, receiver is surely wired properly (tested them with some other quadcopter) and it binds succesfully with radio each time.
When battery connected, quadcopter makes initial "regular" sounds and after that all ESCs, but 3rd, stops beeping. 3rd ESC continues to beep, while back LEDs keep flashing alternately. Following video shows this behavior:
Connected it to Mission Planner (1.3.37, build 1.1.5917.13431 ArduCopter V3.1.2) and Quantum Nova shows following reaction:
I am not an expert (rather beginner), but it seems that something is wrong with hardware, possibly ESC. Is there a way to determine which part is faulty. Please help, any suggestion will be appreciated.
Thank You
My Quantum Nova is unusable - one of its ESCs just keeps beeping and it is not possible to arm motors. This is PNF version, trying to connect it with Turnigy TGY-iA10 receiver and Turnigy TGY-i10 radio. So, just added receiver, nothing else has been changed - all other parts and firmware are intact (stock version).
Both, receiver and radio function correctly, receiver is surely wired properly (tested them with some other quadcopter) and it binds succesfully with radio each time.
When battery connected, quadcopter makes initial "regular" sounds and after that all ESCs, but 3rd, stops beeping. 3rd ESC continues to beep, while back LEDs keep flashing alternately. Following video shows this behavior:
Connected it to Mission Planner (1.3.37, build 1.1.5917.13431 ArduCopter V3.1.2) and Quantum Nova shows following reaction:
- Without battery attached to quadcopter (just connected via USB cable to PC), Flight Controller is beeping and at the same time, ESC No. 3 (back-right arm) makes his sound, but very silently. After battery is connected to quadcopter, FC stops beeping and ESC sound becomes louder;
- Artificial Horizon, on Mission Planner screen, reacts quite appropriate when manually inclining quadcopter;
- Screen indicators react properly on radio sticks movements, so connection Flight Controller - Receiver - Radio should be correct. Anyway, still nothing happens when trying to arm it - Quantum Nova itself makes no any response to radio sticks inputs.
I am not an expert (rather beginner), but it seems that something is wrong with hardware, possibly ESC. Is there a way to determine which part is faulty. Please help, any suggestion will be appreciated.
Thank You
Last edited:
