Hi guys i need to change the motor in my quad ,spec is
3528 NTM motors
30 amp esc
10x4.7 props
3 cell 2200 mah 90c battery
talon v2 550 quad frame weight 280 grms
now the ntm motors eat power so flight time is about 2 mins , so i was looking at a 650 to 810kv motor but ecalc says use smaller motor i tried most motors and prop sizes and it will have no flight time or will say use smaller motor if you look at the ecalc page i saved it has a good flight time but still says use smaller motor , what i am lost now
https://www.flickr.com/photos/114152078@N06/15390683661/
3528 NTM motors
30 amp esc
10x4.7 props
3 cell 2200 mah 90c battery
talon v2 550 quad frame weight 280 grms
now the ntm motors eat power so flight time is about 2 mins , so i was looking at a 650 to 810kv motor but ecalc says use smaller motor i tried most motors and prop sizes and it will have no flight time or will say use smaller motor if you look at the ecalc page i saved it has a good flight time but still says use smaller motor , what i am lost now
https://www.flickr.com/photos/114152078@N06/15390683661/