Eachine wiring for a betaflight

L

lgriffiin

Member
Hi,
I want to upgrade my Eachine 250 CC3D flight controller to a BetaFlight controller. The BetaFlight board doesn't have any connectors like the CC3D mounted on the board which connect to the Eachine PCB board. How do you go about wiring the BetaFlight controller to the Eachine PCB ? Thanks.
 
RENOV8R

RENOV8R

Well-Known Member
We'll need a link to your "Betaflight board". Some require direct connection to battery, some require 5 volt supply.
 
DrAbsurd

DrAbsurd

Well-Known Member
What does the Eachine PCB board do in the new setup? The flight controller you got seems to be a FC w/pdb built in. If you have an RX, ESC's, & VTX You many not need it anymore. The battery leads will be attached directly to the FC and it will power your escs.
 
L

lgriffiin

Member
The flight controller is mounted onto the Eachine PCB board and the PCB board is connected to Flight Controller with a connector mounted on the flight controller. However the Betaflight doesn’t have this connector. There is a screenshot attached.
 

Attachments

  • FBF1F74D-9998-4042-81AE-F6AB2D3C5E47.jpeg
    FBF1F74D-9998-4042-81AE-F6AB2D3C5E47.jpeg
    886.2 KB · Views: 5
mozquito1

mozquito1

Well-Known Member
lgriffiin said:
This is the Betaflight board: https://www.banggood.com/Betaflight...-p-1261362.html?rmmds=search&cur_warehouse=CN
Click to expand...
This is a clone & a bad one by the sounds of it in the comments section.
The only clones I buy are the omnibus f4sd. Quality boards though.
I still have a 3 year old cloned SPRF3 that's had more knocks than a thai hooker.
It's bladderd in liquid silicone & no connectors except USB. It's been in about 4 frames & a wing now its back where it should be, in my x220.
Can't say I've had any really bad boards except the old naze32. Since they went by the wayside I've touched lucky.
Even got 3 year old emax 2205s
 
You must log in or register to reply here.
Top