Devo7

[Noob9875]

I have a friend who is setting up his qav250 with a cc3d fc the problem he is having is flight mode switch he is on a 2position switch and idk how to help him get the settings changed to make the 3 position switch work any helpful video would be nice thanks m8s

 

[Bug Eyes]

Not sure if this is what you or your friend needs but check it out. It shows how to program your transmitter on you're PC, and I remember seeing the 3 switch settings being shown on it. Just go to the (edited)--->4th video down, and just about the 14:35 minute marker.
http://quadcopterforum.com/threads/cheap-250-racing-quad.4510/

Oh, and welcome aboard!

 

[Noob9875]

All that is showing is the build I never saw anything about the tx controller setup to program switch assignment to change switch. And what switch is controlling the flight modes and thanks for the welcome m8

 

[Bug Eyes]

All that is showing is the build I never saw anything about the tx controller setup to program switch assignment to change switch. And what switch is controlling the flight modes and thanks for the welcome m8

Sorry about that it was the 4th video down. Take a look.

 

[RGJameson]

You will have to figure out which switch is controlling the flight modes then configure its OUTPUT to the 3 position FMOD (FMD) switch.