Connectors

[Zec Richardson]

So after finishing the X525 I am now going to go back and remove the connectors between the ESC's and the motors, they are more trouble than they are worth!

 

[GJH105775]

I will certainly agree, I had some motors that the connectors were all soldered bad from the company, I usually use the connectors between the ESC s and motors, but usually end up making my own power distribution cable/circuit.

 

[Jackson]

they are more trouble than they are worth!

What kind of 'trouble'?

 

[glowingturnip]

i cut mine off too, am currently using good old fashioned terminal blocks

 

[Zec Richardson]

I just soldered the wires together, maybe it was my attempt at soldering the connectors together because I was having motor problems. One motor is definitely no good but the seller is sending me another one out.

 

[GJH105775]

i cut mine off too, am currently using good old fashioned terminal blocks

Be careful with terminal blocks, while they are great, make sure you tin the tire, and have a good solid connection, otherwise they can get hot or burn up (just make sure they are big enough and are tight).

 

[GJH105775]

I just soldered the wires together, maybe it was my attempt at soldering the connectors together because I was having motor problems. One motor is definitely no good but the seller is sending me another one out.

Soldered connection is probably the best connection, but you need to make sure you insulate well haha.


I hate waiting, you might try for some extra compensation for the delay.