Check out this ESC! with question.

[Dugdog47]

So I just got this new racerstar aio 50 amp esc in and it looks awesome! When powered up it has two lights that come on and look like eyes on a robot head lol.

It also comes with a plug that looks like it plugs right into my omnibus f4 board.

Neither the board or the esc came with instructions so my question is: does anyone know if this is how these were intended to be connected?

Thanx folks,
Doug

 

[Launchpad]

This is the closest diagram I could find to that FC. The wires from the ESC are motors 1-4 signals & ground, no voltage out so you will have to power the FC from elsewhere. The ESC pinout says "NC" in the empty spot for the connector, but I wonder. You will just have to be sure the motor locations match the right numbers going to the FC (gnd-5v-3-4-2-1 on the FC vs gnd-nc-1-2-3-4 on the ESC). A multimeter might show continuity from the thru hole pads to the sSMT pads for the connector.

 

[Dugdog47]

Figured it out, this is honestly the first time I ever soldered the signal wires into the fcb lol. It's real fun and I'm addicted!!!