changing my quad around, are my esc ok? baby beast 4s safe?

[Dudeskin]

Hi all, so i got a different frame, and a naze32 to replace my naza lite (i fancy a change and cheaper to replace).
i have baby beast v2 motors (http://www.hobbyking.co.uk/hobbykin...06_2150KV_Motor_The_34_Baby_Beast_34_V2_.html)
and afro 12a ESC.
the thing is i have some 4s batteries but mostly 3s. id really like to be able to use them safely rather than not at all ( once i get confident enough).
im worried about pulling too many amps, i know im not going to be at full throttle much if at all but i like to be covered.
http://www.rcgroups.com/forums/showthread.php?t=2203375
this thread has charts on it but everyone seems to be unsure about 4s on these, specially with the tri 5030 props i have loads of.

can anyone shed any more light on this? 12amp seems a little low but id rather use the same stuff and just swap the frame and naza.

thanks all,

joe

 

[GJH105775]

Hi all, so i got a different frame, and a naze32 to replace my naza lite (i fancy a change and cheaper to replace).
i have baby beast v2 motors (http://www.hobbyking.co.uk/hobbykin...06_2150KV_Motor_The_34_Baby_Beast_34_V2_.html)
and afro 12a ESC.
the thing is i have some 4s batteries but mostly 3s. id really like to be able to use them safely rather than not at all ( once i get confident enough).
im worried about pulling too many amps, i know im not going to be at full throttle much if at all but i like to be covered.
http://www.rcgroups.com/forums/showthread.php?t=2203375
this thread has charts on it but everyone seems to be unsure about 4s on these, specially with the tri 5030 props i have loads of.

can anyone shed any more light on this? 12amp seems a little low but id rather use the same stuff and just swap the frame and naza.

thanks all,

joe

What battery and ESCs are you using? I think the problem is first going to be on the motors as you are to only draw up to 10 amps.

 

[Jackson]

Hard to sort thru all, but isn't this the chart close to the combo you want?

Sure looks like 12A is fine.