Can someone help me ?

C

Chezney

New Member
How do i connect these together ?

Does it matter where the 3 cables from the motor connect to the speed controller.

Where does the 5 pin connector from the lipo battery connect to the flight controller ? !!


And where does the speed controller connect to the flight controller ?

And lastly can i connect 4 speed contollers with only 2 lipo batterys , i have checked the power it takes to control all motors
 
Hi mate ok each ESC will have 2 power leads red+ , black -, you can connect these to a battery how ever you wish 1 battery per ESC or 1 battery per 2 ESCs, The ESC will have a max voltage so dont go over this , the 3 main wires connect to the motor to change the direction it turns just swap any 2 wires , the small white plug is a balance plug this goes on to the balance charger ( 4 button lipo charger etc) you can use the balance plug to run things like LEDs FPV etc just dont pull to many amps or it will melt
the black plug with the 3 wires goes to the FCB this goes onto the motor out pins of the board middle wire is always live , the lightest colour wire is always signal wire so make sure they plug in the right way round
 
Chezney said:
How do i connect these together ?

Does it matter where the 3 cables from the motor connect to the speed controller.

Where does the 5 pin connector from the lipo battery connect to the flight controller ? !!


And where does the speed controller connect to the flight controller ?

And lastly can i connect 4 speed contollers with only 2 lipo batterys , i have checked the power it takes to control all motors
Click to expand...


Youtube dude, youtube is your friend right now.
 
Back
Top