Binding TaranisX9D with GoolRC Gool G90 Quad

[QuadKid]

Hey All,
just received a new Gool G90 Quad and having a hard time binding it up to my Taranis. Went through all the motions, set up new model, have tried binding it in all modes holding down the bind button then powering it on in bind mode on the TX. Here are the specs, any help would be greatly appreciated.

Here is a link to the specs
http://www.goolrc.com/drone-3116/p-rm7361-1.html

 

[QuadKid]

Well just for future knowledge I figured out this Tiny Whoop! Turn out many of these micro quads with FrSky XM+ RX are flashed using the D8 setting on the Taranis. Once I got that figured out and got it bound went into BetaFlight thinking I could set my switches / Expo's and modes as I do on my ZMR220 & Martian 250 but got nothing but the "CLI" warning. Ah an epiphany! The Walkera 210 gave me the same when trying to use BetaFlight. Long story and many ours later once I got it bound, throttle down right to arm, throttle down left to disarm, flew it in angle mode in the backyard all worked OK, gonna go over to my fly field in the morning to find out what switches control Horizon and Acro Modes.