Hello all, this issue I'm having would apply to the Tie Fighter, X-Wings and I think the Millenium Falcon. I bought a used Propel Star Wars 74-Z speeder scout bike drone that didn't include a controller. I know the drone works because it lights up when a battery is inserted. I would like to bind it to my Radiomaster TX16S multi-protocol transmitter/radio.
In the protocol list of the TX16s (that has a 4-in-1 module), there's one called Propel 74-Z. I followed these steps but it won't bind.
1. Plug in battery to the Propel 74-Z biker drone ..lights flash awaiting bind/sync
2. Turn on TX16S and select the protocol for Propel 74-Z and it starts to chirp as if it's attempting to bind
3. Manipulate the TX16S controls like up then down on throttle stick and various other motions ..even the switches.
I have even reversed the above #1 and #2 so radio turns on first then the drone.
What am I doing wrong? Is there a bind button on the 74-Z drone that I need to disassemble and press?
In the protocol list of the TX16s (that has a 4-in-1 module), there's one called Propel 74-Z. I followed these steps but it won't bind.
1. Plug in battery to the Propel 74-Z biker drone ..lights flash awaiting bind/sync
2. Turn on TX16S and select the protocol for Propel 74-Z and it starts to chirp as if it's attempting to bind
3. Manipulate the TX16S controls like up then down on throttle stick and various other motions ..even the switches.
I have even reversed the above #1 and #2 so radio turns on first then the drone.
What am I doing wrong? Is there a bind button on the 74-Z drone that I need to disassemble and press?
