Hugh Hemington
Well-Known Member
Is the best way to spin just one motor to connect the ESC to the receiver channel for throttle? I wonder if there is a tool that will spin a motor at a selected RPM, or selected voltage and I can do the math based on kv? Maybe sort of like an ESC programmer?
I'm going to either have to deal with these awful Turnigy motors, or just bag them and move to SunnySky. I have a 720kv set on order, but I was going to use them on my new Alien 560 frame along with the 4S lipos I swapped out for 3S on this QuadLugs frame. As I posted before, two of the four Turnigy motors had bad grub nuts that I reamed out to make engage the shaft far enough, but the defects may now be contributing to the unacceptable deflection at speed.
I'm going to either have to deal with these awful Turnigy motors, or just bag them and move to SunnySky. I have a 720kv set on order, but I was going to use them on my new Alien 560 frame along with the 4S lipos I swapped out for 3S on this QuadLugs frame. As I posted before, two of the four Turnigy motors had bad grub nuts that I reamed out to make engage the shaft far enough, but the defects may now be contributing to the unacceptable deflection at speed.