Hi all again. I've searching and reading since the last time and I have taken note of your helpful comments for build my 250 quad.
This is the final outcome (I think).
x1 Radio Transmitter (Flysky FS-i6) $53.92
http://www.amazon.com/dp/B00VE3PZ3Y...TF8&colid=2DZ4SLJMXAQCB&coliid=I2EQEN0SI7QKWD
x1 Battery charger $15.97
http://www.ebay.com/itm/252065533285?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
x1 FRAME $37.99
http://www.amazon.com/dp/B00WE9EGAA...TF8&colid=2DZ4SLJMXAQCB&coliid=I2885JU7MWDCC6
x4 Motors (Emax MT2204) $53.99
http://www.amazon.com/dp/B00XY6SQQC...TF8&colid=2DZ4SLJMXAQCB&coliid=I33ITCT665XH44
x4 ESC (Makerfire 20A BLHeli) $35.99
http://www.amazon.com/dp/B01DEN46I6...TF8&colid=2DZ4SLJMXAQCB&coliid=I1IWENFSB9YPTH
x1 Flight Controller $22.55
http://www.ebay.com/itm/301831483381?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
x1 PDB With OSD $25.59
http://www.amazon.com/dp/B01CKWSGYC...TF8&colid=2DZ4SLJMXAQCB&coliid=I2UQH1ZB4W2EUY
x3 LiPo Battery (Tattu 1300mAh 75C) $71.97
http://www.amazon.com/dp/B013I9SYC0...TF8&colid=2DZ4SLJMXAQCB&coliid=I2HAU48T68PJ7T
x1 Quanum FPV Goggle $40.47
http://www.amazon.com/dp/B00YPZ9N4A...UTF8&colid=2DZ4SLJMXAQCB&coliid=IWZWBTQUI7905
x1 Booscam 32Ch Tx and Rx $32.87
http://www.amazon.com/dp/B00GWFUTSK...lid=2DZ4SLJMXAQCB&coliid=I1CCL5LH1PZUZB&psc=1
x1 FPV Camera PZ0420M $31.99
http://www.amazon.com/dp/B00PGFDSRQ...TF8&colid=2DZ4SLJMXAQCB&coliid=I2FKZLYW14454M
x2 8 set DAL props 5x4.5 $21.98
http://www.amazon.com/dp/B01CRCJMCK...TF8&colid=2DZ4SLJMXAQCB&coliid=I2YQ3KW9BE4F0G
What do you think?
Would you change something?
I know I pass a little of the $400 dollars gift card but is not much and the LiPo charger it is less than half the price on Ebay.
Would you recomend me a 3S 1300mAh 75C or a 4S 1300mAh 45C Tattu battery? (since they are roughly the same price).
I think I have to clarify something, I'm from Argentina so if something breaks it will be very very difficult to get replacements parts, so may be that's why i would like to have a robust build with less chance that something will burn.
Thanks again for your time and I'll be glad of hear any helpful comment.
This is the final outcome (I think).
x1 Radio Transmitter (Flysky FS-i6) $53.92
http://www.amazon.com/dp/B00VE3PZ3Y...TF8&colid=2DZ4SLJMXAQCB&coliid=I2EQEN0SI7QKWD
x1 Battery charger $15.97
http://www.ebay.com/itm/252065533285?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
x1 FRAME $37.99
http://www.amazon.com/dp/B00WE9EGAA...TF8&colid=2DZ4SLJMXAQCB&coliid=I2885JU7MWDCC6
x4 Motors (Emax MT2204) $53.99
http://www.amazon.com/dp/B00XY6SQQC...TF8&colid=2DZ4SLJMXAQCB&coliid=I33ITCT665XH44
x4 ESC (Makerfire 20A BLHeli) $35.99
http://www.amazon.com/dp/B01DEN46I6...TF8&colid=2DZ4SLJMXAQCB&coliid=I1IWENFSB9YPTH
x1 Flight Controller $22.55
http://www.ebay.com/itm/301831483381?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
x1 PDB With OSD $25.59
http://www.amazon.com/dp/B01CKWSGYC...TF8&colid=2DZ4SLJMXAQCB&coliid=I2UQH1ZB4W2EUY
x3 LiPo Battery (Tattu 1300mAh 75C) $71.97
http://www.amazon.com/dp/B013I9SYC0...TF8&colid=2DZ4SLJMXAQCB&coliid=I2HAU48T68PJ7T
x1 Quanum FPV Goggle $40.47
http://www.amazon.com/dp/B00YPZ9N4A...UTF8&colid=2DZ4SLJMXAQCB&coliid=IWZWBTQUI7905
x1 Booscam 32Ch Tx and Rx $32.87
http://www.amazon.com/dp/B00GWFUTSK...lid=2DZ4SLJMXAQCB&coliid=I1CCL5LH1PZUZB&psc=1
x1 FPV Camera PZ0420M $31.99
http://www.amazon.com/dp/B00PGFDSRQ...TF8&colid=2DZ4SLJMXAQCB&coliid=I2FKZLYW14454M
x2 8 set DAL props 5x4.5 $21.98
http://www.amazon.com/dp/B01CRCJMCK...TF8&colid=2DZ4SLJMXAQCB&coliid=I2YQ3KW9BE4F0G
What do you think?
Would you change something?
I know I pass a little of the $400 dollars gift card but is not much and the LiPo charger it is less than half the price on Ebay.
Would you recomend me a 3S 1300mAh 75C or a 4S 1300mAh 45C Tattu battery? (since they are roughly the same price).
I think I have to clarify something, I'm from Argentina so if something breaks it will be very very difficult to get replacements parts, so may be that's why i would like to have a robust build with less chance that something will burn.
Thanks again for your time and I'll be glad of hear any helpful comment.