I currently have a 22.2v 5000mAh lipo on my first quadcopter build, its pretty heavy but I have some 800kv motors with 11in props/30A esc's that have no problem lifting it off the ground.
The problem is, despite all of my calibration efforts, "hovering throttle" causes it to lift off the ground significantly. I figure the high voltages have sort of put the motors into overdrive and have caused them to be too powerful even at their base throttle. Not to mention I had an esc stop functioning, but I don't know if thats the result of too much power or what.
Does anyone see any immediate problems with a 22.2 6s 5000mAh lipo paired with 30A esc's and 800kV 300W max motors?
Ive been told to just put more inefficient props on it to cause to to create less lift, but I figure that would make my battery drain faster while giving me less power to work with.
The problem is, despite all of my calibration efforts, "hovering throttle" causes it to lift off the ground significantly. I figure the high voltages have sort of put the motors into overdrive and have caused them to be too powerful even at their base throttle. Not to mention I had an esc stop functioning, but I don't know if thats the result of too much power or what.
Does anyone see any immediate problems with a 22.2 6s 5000mAh lipo paired with 30A esc's and 800kV 300W max motors?
Ive been told to just put more inefficient props on it to cause to to create less lift, but I figure that would make my battery drain faster while giving me less power to work with.
