Assembling X666 quad build.

[irishluck]

Thats the issue, i was unable to get the nut on at all...

 

[holtneil]

Have you gone on chat with Hobby king and asked about the props that will fit 100% , the multi star is the clone of the DJI motor so the dji clone blades should fit the 2 I linked you are they the ones you got

 

[irishluck]

http://www.hobbyking.com/hobbyking/...tor_Prop_slot_DJI_Style_Hub_pack_of_two_.html

I bought these props that are multistar propellers and they wont even fit all the way on the motor shaft.

 

[holtneil]

Well I would be onto Hobby king and be asking are the motors machined right seeing the matched props dont fit , get a refund while your on there for props that cant be used

 

[irishluck]

Im going to be sending back some of the props I got since they say they work and never did.
But I finally got some props that work.

Only thing I am waiting for now is some servo jumper cable and the programmer.

 

[holtneil]

HI mate so what props do work then , its nice to add info to the thread as it help others
Also dont forget to down load the flash tool while your waiting
http://lazyzero.de/_media/modellbau/kkmulticopterflashtool/kkmulticopterflashtool_0.77.zip

 

[irishluck]

The only props that I have found to fit are these ones

http://www.ebay.com/itm/290924438866?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
they are a carbon fiber 8mm DJI prop

The whole programming this KK FC is a pain in the ass though


I cant get the quadcopter to idle properly or to just hover right

 

[irishluck]

How do I get this thing to hover properly? I have all the motors almost synced together.

I tried syncing the motors together with a youtube video someone pointed to me too, which that didnt work at all.
Then I read somewhere online about turning up the idle. So I turned it up and it almost seems like its working except the motors are still not spinning 100% together.

Every time i run it, it seems that it wants to take off more to the right than jusr up.

HOw do I fix this?