ArgoEngineering
New Member
These are the motors I'm going to be running,
http://www.emaxmodel.com/brushless-motor/emax-mt2205-ii-racing-edition-kv2300.html
Here are the blades I'm running as well,
http://www.surveilzone.com/2-Pairs-Tri-blade-DALprop-5045BN-Bullnose-Props-for-FPV-Racing-g-1484
I have a 4s Turnigy Mulitstar Race Spec 14.8V 1400mAh 40-80c battery I'm using.
If you view the spec sheet on the motors, it shows that 20.7A is the max output with
a 5046 blade and a 16V battery source. I'm at a loss trying to figure out which ESC I should be using for I don't know the max amperage with a 14.8V battery the motor will produce. I've gotten a couple responses saying to use a 20A, but I think I'll exceed the amperage of the ESC.
I'm looking at the Turnigy Plush 25A or the Afro Race 30A SimonK/Timecop. I'm all ears for better ESC's on the market.
Just trying to figure out what amp ESC I need to use and what companies are reliable. Thank you.
http://www.emaxmodel.com/brushless-motor/emax-mt2205-ii-racing-edition-kv2300.html
Here are the blades I'm running as well,
http://www.surveilzone.com/2-Pairs-Tri-blade-DALprop-5045BN-Bullnose-Props-for-FPV-Racing-g-1484
I have a 4s Turnigy Mulitstar Race Spec 14.8V 1400mAh 40-80c battery I'm using.
If you view the spec sheet on the motors, it shows that 20.7A is the max output with
a 5046 blade and a 16V battery source. I'm at a loss trying to figure out which ESC I should be using for I don't know the max amperage with a 14.8V battery the motor will produce. I've gotten a couple responses saying to use a 20A, but I think I'll exceed the amperage of the ESC.
I'm looking at the Turnigy Plush 25A or the Afro Race 30A SimonK/Timecop. I'm all ears for better ESC's on the market.
Just trying to figure out what amp ESC I need to use and what companies are reliable. Thank you.
