Hey, I have a Craftbot Plus. It has a single extruder, and a 200X250X200mm build volume. Currently I have Blue Hatchbox ABS, and some Red Hatchbox PLA + a spool of White CraftBot PLA. I would be willing to buy some other types of filament. I also currently have some M3 screws and brass female parts to go in the plastic to accept them.
I am not a business so my prices are going to revolve around cost, and time to process which may be cheaper, if you do find a cheaper quote on the same service just let me know and I'll decide if I can match it or not. You can either provide just models or you can slice it yourself and I would just print and process (I don't do acetone yet, but can later if needed). If you need some help with getting a design or model made I can also do this. Mostly this is another hobby so I am not really looking to make much money off this, just help to justify the equipment I buy for that supporting my personal quadcopter hobby.
If needed I can also help with the electronics side of the project, though that won't be at any cost unless it involves me buying parts.
https://craftunique.com/item/craftbot-plus-anthracite-gray
I'd rather work on projects involving the hobby, but can probably 3D print about anything here. I would use paypal and would be easy to work with regarding prices. If you are interested or even think you might be just message me and I'll get you an estimate on time, and cost of material, shipping and any labor that may be involved.
Worst thing that can happen is that you get the estimate and decide to go a different route.
I am not a business so my prices are going to revolve around cost, and time to process which may be cheaper, if you do find a cheaper quote on the same service just let me know and I'll decide if I can match it or not. You can either provide just models or you can slice it yourself and I would just print and process (I don't do acetone yet, but can later if needed). If you need some help with getting a design or model made I can also do this. Mostly this is another hobby so I am not really looking to make much money off this, just help to justify the equipment I buy for that supporting my personal quadcopter hobby.
If needed I can also help with the electronics side of the project, though that won't be at any cost unless it involves me buying parts.
https://craftunique.com/item/craftbot-plus-anthracite-gray
I'd rather work on projects involving the hobby, but can probably 3D print about anything here. I would use paypal and would be easy to work with regarding prices. If you are interested or even think you might be just message me and I'll get you an estimate on time, and cost of material, shipping and any labor that may be involved.
Worst thing that can happen is that you get the estimate and decide to go a different route.