Search results

Thanks for the advice on moving the battery and vtx. I think it's the battery that broke my usb port. So you don't think that having gps would make it fly more stable and control it where you can fly slower and hover easier while you are learning?

I have a Eachine Racer 250 and I noticed that my Mini USB port is missing off of the controller card. I don't know how, but I guess it got knocked off in a crash. So, it came with the CC3D controller card. If I have to replace the controller card should I put back the same one or is there a...

I am using a 3DR Iris+ with Mission Planner 1.3.37 and APM Copter 3.3.3. I am not able to get it to arm. In Mission Planner I get a message of GPS Horiz 1.0 and Yellow blinking light. The light will never go Green showing GPS lock but my controller says I have 8 Satellites Locked. I have done...

I still have to check on that wire, but do you know if I have a Lipo Battery that reads 1500 mAh 3S 11.1V 25C can I replace it with one that reads 1500 mAh 3S 11.1V 35C. I know that 25C or 35C has something to do with Amperage. Will 35C burn something up?

Oh.. maybe that's the part I missed. I will go back and check on that. Thanks.

That's how I had it set up, with the jumper and using the CPPM, but I couldn't get any response from the controller while I was setting up the software. I will investigate and see if maybe on of my wires needs reversed or something. I'm not sure which direction to go with this.

Thanks, I think part of my problem is that the Eachine Racer 250 requires a 6 channel receiver and I was trying to use a 4 channel. I order a new receiver. We will see it that makes things easier.

I am trying to set up the Eachine Racer 250 with a FS Th9X transmitter using a FrSky D4R-II 4 channel receiver. This is the setup that I use for my 3DR Iris+ and I would like to be able to use the same transmitter for both. Is this combination possible, or do I need a different receiver? I...

I have a Iris+ and another one for parts. I am looking for a FPV racer that I can use my FS Th9x Controller and the receiver out of my spare Iris in. Does anyone have any ideas if there is a racer that will work? Thanks

I have a Iris+ with the FS-Th9x Controller. The controller displays the Altitude and Battery Voltage of the Model. Is there any way to make the controller give a low Battery Voltage Level Alarm for the Model? The controller will alarm if it has a low battery, but I would like to know when the...

I have a Iris+ with the FS-TH9X Controller. The OSD on the controller shows a Battery Voltage for the Iris+. Is there any way to make the controller sound a alarm if the Iris+ battery level drops to low?

I have a Blade 350QX2 running Version 2 Firmware with the DX4 controller. I just replaced the main board because it got shorted out. I have replace every other sensor also, GPS, Compass. I have installed the new board and sensors and have calibrated everything. The new board does not play the...

Thanks for posting. My switch is like yours. 2 positions, momentary. I know they are out there I just haven't found them yet.

I have a Iris+ with the Iris+ FS-TH9X controller. I found one of my switches was broken today. Does anyone know where I can buy a replacement switch? If your looking at the controller it is Top Left Rear switch. It is a spring loaded switch and not a toggle switch. I attached a picture of...

I have a Blade 350QX2. I just replaced the main board and compass because it got shorted out. I have installed the new board and was Calibrating everything. I was having trouble getting anything to calibrate. I re-installed firmware 2 and calibration seems to work, but I still get a drift to the...

I may have solved the issue of my FPV cutting out after 4 minutes. I found someone online saying the GoPro turned off their USB port after a short time when they did a firmware update. I have a SmartFPV GoPro Video Board...

I will test that theory and get back to you. Thanks.

I don't know anyone else that can check the monitor, but I am finding out that it starts up and has a picture. It will run for 4 minutes and then loose the picture. If you turn everything off for 15 minutes it will start up and run for another 4 minutes. The power to the Transmitter shows 12...

Well I spoke to soon. About as long as it took me to send this email 3-4 minutes, I went back to check on it and my picture was gone. Now it acts like my original board and I can't get a picture. Any other suggestions?

I tried it again just now and I have a picture on Channel 8. I guess we will see how long it works.