Search results

500 frame 1000kv motors 30amp esc's 5.2a battery Title says it all really. Ill thottle my radio just enough to get the motors to start spinning, ill let it sit there for like 30 seconds and all of a sudden they will start to spin up by themselves. I redid the whole cc3d board, reprogrammed...

So im trying to get one of my drones setup properly for a float trip coming up and I still cant get these PID setting setup properly. Im using 2212 1000kc motors on my Quad. I do believe these are 30a ESC's. 500mm frame. CC3D Flight controller. HAS FPV camera setup and gopro mounted. I am...

Will repost at a later date.

Just got my new FrSKY Taranis X9D plus. Trying to figure out the basic wiring setup for the X8R with a CC3D flightcontroller.

Im trying to complete my new build here. Ive checked and rechecked all my wires and there is nothing shorting out or touching. My ESC's are plugged into the cc3d and ESC's plugged into the motors. I plug in the battery and the cc3d FC lights do not come on but the ESC's start to heat up...

I had this issue before and now Im having this issue again and cant seem to get it to work. Received a new cc3d board and hooked it up. Cannot upgrade it with the openpilot setup wizard. Tried going into the firmware section and manually erasing the setting and updating and still nothing...

Got my new frame last week. 470mm. Decided this will be my quad for scenery flying/ recording. Has much more space on it for camera's then the x666. But since I now have 2 of the x666 frames(666mm X frame) I'm going to attach them both and make a octa-copter with it! Should be interesting...

SO basically I have no idea where to start with this lol I downloaded the software openpilot GCS. Just curious if anyone has ever used this and where to start exactly.

So this is my first attempt at making a magnetic propeller balance jig. Not bad I dont think. Just need to figure out what to use in the center to keep the propeller tight and what not. I tried to use a pen cap but cant get it centered 100% to get glue in there. Any thought?

So after watching some videos online I'm very interested in building a heavy lifting quadcopter. Does anyone know where to look at for electronics? Such as the motors and ESC's? I'm wanting to build one that can lift a couple hundred pounds. May sound kinda odd since I've only been messing...

Getting ready to buy my first FPV system so pretty excited. Im wanting to go with goggles and to be specific Im looking at the Headplay or maybe fatshark, but Ive been reading up on some bad reviews with fatshark. Also Im looking at 2 camera's and didnt know possible what to get for an awesome...

So I switched my receiver to my quad copter I just repaired and first thing I noticed was the KK board came up with an error. Well I then noticed that the LED light on Receiver isnt coming on. Even switched it back to the other quad copter and it didnt work there either. Maybe Im not putting...

sold

So I got my new transmitter a couple days ago in the mail with the receiver, just got that hooked up a little bit ago and unfortunately hasn't fully solved my problem. It still seems like 2 of the 4 motors are spinning at a higher speed than the others. When I tested it out earlier. I turned...

So I have this helicopter I bought a year ago from someone. Never really has flown right. top prop wont turn, stripped inside. Wanting to maybe make into a single prop? Im wondering if someone has ever done something like this. Not even sure if I should be posting this on a quad forum ha.

So i don't know if its the FC board I'm using or the motors but i cant get my quad to fly straight or go up straight or anything. I'm constantly having to change the settings on my remote to get it to fly straight but then when I try to take off again I have to adjust the setting again. So im...

So Im trying to reflash this dang KK FC and im getting an error now. "C:\Users\NICHOLAS\My Programs\Quadcopter\kkmulticopterflashtool_0.77\lib\avrdude\windows\avrdude.exe -C C:\Users\NICHOLAS\My Programs\Quadcopter\kkmulticopterflashtool_0.77\lib\avrdude\windows\avrdude.conf -p m644p -P usb -c...

I've tried to calibrate my motors maaaaany different times and it is still not working properly. The video I am posting on here is showing the flight after attempting to calibrate the ESC again. You can see that the quad only likes to take off on one side. Also when I turn the throttle down...

Pretty much what the title says. I installed new firmware last night. the 1.19S1 version. Everything working except the main screen shows error and says "no motor layout" I just figured out the motor layout. But still says no yaw input

So Ill start off with the parts I'm using with my quad. Frame: Hobbyking X666 ESC: Hobbyking 30A Controller: Hobbyking KK2.1.5 Motors: Multistar Elite 2216-920 2-CW 2-CCW So I've started my assembly process and a little confused. I dont know which wires on the motors connect to the 3 wires on...