Search results

Picked some up at radio shack. Just to be clear, I should put these on the leads going to my fc? or on the + and - ive soldered directly to the PDB? Stupid question, I know.

http://www.hobbyking.com/hobbyking/store/__23206__Clip_On_Soft_Ferrite_Rings_5pc_.html Are these worth a try, guys?

Thanks! Yea, I've resorted to getting new escs. I'm waiting to see if Jackson isn't fed up by me enough to answer my dumb noob questions about the escs he shared a link for, then I'm going for it...

Jackson, as always you have great info. What is the difference in the "various configuration" options? I mean, What would I expect from the different options? And can you explain what "one shot" is?

What flight mode are you in? Sounds like possible settings issue on cc3d. And( just to be sure) the blades are on correctly and the motors are spinning in the correct direction? Also, how do you have your esc into the cc3d? There is a proper order...

Thanks GHJ! Ill probably get some.

Its not dropping dead here!! You guys are all awesome!. I will shield the esc's with tin foil tonight and see if that helps. Um, could one of you guys recommend a better esc? I kinda don't want to do business with rctimer again... hobyking or helipal? Or somewhere reputable?

Any tips on how to isolate them from each other to see which one it is?

So what do I do? How can I shield one of the components?

Yea. For a second. My vtx is on the top plate of my frame. It seems no matter what I do, I can't get the vtx and the RX for the controls far enough apart. I have moved the RX and the fc directly behind the camera, as far forward as the frame allows. Then I put the vtx on top of the upper...

Ok. So took everything apart. Powered camera by itself and walked it across the room. Powered up the quad, gave it throttle, IT WORKS! !! So it's interference with the controller. Problem is now, trying to reposition everything on the quad. Gonna put everything as far away as possible. I'll...

Thanks for the info! Where the battery sits on the top of the quad, there is no room to mount anything behind it. the battery takes up the entire space between the mounting plate for a go pro or Mobius, (With the little rubber vibration feet) and goes all the way to the end of the top plate...

I will take off the fpv system tonight. Its "easily" done by removing the top plate of my quad. as of right now, I have the battery mounted on that top plate, with the vtx underneath. maybe I can get the battery to fit in lower and mount the vtx on the top. first ill try to just separate the two...

You think it's on the VRX part? I just assume with my inexperience and all the stuff I've put my VTX through, it would be that. Or do you think it's my control RX? Can I shield it somehow? My problem is, I can't afford to buy everything again.

No I haven't. That's kinda major surgery. But I'll try it next...

Well, now it's both. So I just hooked up 2 batteries, one for the fpv only the other one for the quad. Took the props off, and tested on the table. While nothing is running, the video is perfect. I can't make it cut out. I put both hands over the antenna, it's CRYSTAL CLEAR. Throttle up even...

So I can get the video to work. But ANY throttle, it cuts out. Any. I seemed to have it fixed after some corrected wiring, but outside it dosn't work....

VTX AND CAMERA: http://rctimer.com/product-1275.html VRX: http://rctimer.com/product-993.html ANTENNAS: http://rctimer.com/product-1090.html "GOGGLES": http://www.hobbyking.com/hobbyking/store/__78125__Quanum_DIY_FPV_Goggle_V2_w_5_inch_LCD_Monitor_Kit_.html MOTORS...

*SIGH* It really is nice. And truth be told, I like my spectrum controller too. I feel like I have tried EVERYTHING to get the FPV working. Im as new as new can be to quads and rc and FPV. So im sure its just me not being able to figure it out. I have had A TON oh help from other members, but...

FRUSTRATED!!!! I built a Argonaut AQ320 from RCTimer. I put in a CC3D atom fc, and am using the Spektrum DX6 and the receiver it came with. THIS QUAD FLIES!!! I have flown it, but I cannot make the FPV work and I'm so frustrated I'm just going to buy a RTF and be done with it. I cannot upload...