Search results

I had an mjx x600 great lil setup I got the quad and "fpv" WiFi camar on eBay for under a hundred it has headless mode which I think is way over rated it was really weird to control and got me into trouble taking the prop gaurds off helped loads in the wind and with speed and also stability the...

Yea I have an mjx x600 headless mode is over rated in my opinion I didn't like the way it flew it was just to wonky and if u take the prop gaurds off it will do loads better in the wind and speed and stability also is my experience

What are some good lower end motors I can pick up I really wanna save the cobras till after some training and what is a good site to find them on. And thanks very much for the help

I figured it out I took the ccw motor off the back and swaped with the front now it does the opposite the back takes off and front nose dives with a pitch to the right where the #2 motor is and the ecs is chattering at higher throttle value so decided to put the cobras on and takes off with a...

I put it on a pincel and it stays balanced the front motors are spinning way faster

How do you see if the ecs is set that way and I have made a point to center everything through the build

Now the problem I am having is the front of the quad takes off way faster than the rear so it just wants to flip I whent through the setup wizard on my gcs and recalibrate everything the motors kick in at same rate witch is 1120 all sound the same props are on right way and all motors going in...

Got my props when I go to take off the front lifts faster than the front does any ideas

4 x RHD 2204 2300KV Brushless Motor For 250mm Robacat 270mm C300 Multi Quad Cop Features: - Light weight design - Longer duration of flight - Low CG Design, decreasing vibration when motor runs - Using Japanese NMB ball bearing, Japanese Kawasaki stator, Ndfeb with strong magnetic and high...

I'm using rdh chinese motors I have a set of the cobras but I wanted to wait till I got some fly time before I jump to the expensive motors

OK I got my motors in set everything up the only thing stopping me is prop s my local hobby store has 5*4.5 in stock I'm using 2204 2300kv motors with 12aescs 3/5v bec I have a 3s 1500mah 30 con and 60c burst I don't want to burn up my motors or my ecs

Yep motors will be here in the morning and battery that is all I need everything else is on and all works I set the tx/rx up already on openpilot download the new s oftware/firmware to the board so once I get the motors I can run through the setup wizard and hit the park

Yea I hooked all the cables up the right way and after a couple hrs of playing with my tx I figured out the settings and got everything working and I'm reading the telemetry also so I'm very happy lol

I just got my i6 tx with ia6rx I am having issues with the setup I got on my gcs for openpilot and started to setup the control and my controls are not where they should Throttle is vra Fc switch is vrb None of the accessories switches work I really need some help setting up everything thanks...

Almost ready to fly

And that's a perfect pic I have same colors and I am so close to finishing my build motors and last ESC should be here today and batt ,rx/tx, props and charger anyday now ha-ha so ready

Yea I know they varie that's why I wanted to see his setup and thanks for the close up of the harness I didn't know it was as simple as 1234ect I didn't know if any of the wires crossed

Ha-ha yea that's for sure :crying laughing

Never really got the hang of headless mode and how many motor sets have u been through lol I've gone through 7 sets

Scared the hell out of me and with mjx I figured out I could free fall till about 20' full throttle and full forward gets u our of all the prop wash it recovers perfectly and yea that guy is awesome if he sees me out he will launch off and buzz my quad he has got good last time I was over he...