Search results

Hello boys I'm mounting the receiver on drone I have a Taranis-e With receiver x6r (Mounted in PWM goes ... ) So ... Connect the receiver to the socket sbus sklyline32 to the first channel I go to put the port enables SerialX in UART 2 Then I go to receiver mode configuration, and put on...

Good evening, for have to a tidy configuration, can I plug the all esc on a single socket of ESC on PB? Give One socket enough current for four esc under stress? Then, on the bec by 12v, can I plug the cam+vtx and four led by 12 volt each one? Every exit have 12 volt or is split?

perfect thansk i will use the stock firmware

hi, the my esc are http://www.emaxmodel.com/blheli-series-20a-esc.html if i buy this KINGKONG ESC PC Software Communication Adapter USB Linker For BLHeli Firmware (1023395)can i flash them in few secon with usb and bhelisuit? or i must open the esc make the solder and spend many time for flash?

I have activated oneshot 125 with cleanflight but i do not go on BLHeliSuite for read the esc? Someone know what i do for read the esc and flash the last firmware?

Hello people I have Esc emax 20a blheli I try to connect FC to pc with the esc connect to the FC I open BLHeliSuite click on connect e then on read but the program give me error and not work. I would update the firmware and to put the one-shot operative Someone can help me.

Perfect, thanks for answer I cut the wire of signal of Eachine 800tvl and solder on v in e v out The power of Eachine 800tvl I take from bec 12 v from Power board The ground of Eachine 800tvl I left without solder as plugged the cam and the tx

Hi guy tomorrow i star to built my quadcopter, any question, there is a image take fron rc group fot mout the fpv sistem can i mount in this mode?

Forgive my bad English, but I helped with Google translator. I would like to make a drone fpv, the GPS was a nice thing to assemble that when I wanted I could stabilize the drone and then cost 10 euro . My budget is about 230 dollars 200 euro. Esc and motors I am informed, the ones I have...

Hello people, I got the urge to build me my first drone. I have a walkera 250 and now I have the desire to build me a drone everything alone. I made a list of everything I need and I wanted to know who is responsible if what I choose is fine and if possibly, I need nothing else. Objects in...