Search results

I brought up this issue on one of my last threads. This thread is a follow-up as well as a weird solution possibly applicable to certain models...…………... Printer : Creality Ender 3 Slicer : Cura 4.3, occasionally Cura 3.4.1 OK. I was printing Dino, the dinosaur from Flinstone. The model...

Quite elegant, in my opinion. Like the other one I printed, many holes were plugged with plastic. Took some time to pick them clean. Notice the pot has 2 layers, outer and inner layer.

I don't have the training to do the stepper driver amperage. I have to pass. Nozzle temperature is and has always been 200 degree set in my slicer. I could up it to 215. I know how to do that in my slicer. I have also up my bed temperature to 60 in my slicer instead of the default 50 degree...

I spoke too soon. Slice it upside down does not really help. The shifting right is not so obvious, but it is still there. No good for me to have a defective base.

To elaborate further : If I have Superman round base placed in the grid the "normal" orientation, printing will fail for reason stated in post #1. If I place it upside down (inverted) on the grid, it will come out fine. So, you might say...… "well, do it upside down then." Point is: 1. To...

Printer : Creality Ender 3 Slicer : Cura 4.3 I am having this problem since day one. If I were to print a platform/base, regardless of shape, circular, square, or rectangular, I would encounter the same problem. Problem : The layers are NOT exactly printed over the previous one. After a few...

size : 100% height : about 5 inches version : twisted vase, hollow. No supports.

Size : 70% Height : about 4 and 1/2 in. tall. It's hollow inside. From start to finish, absolutely no supports used. Think I'll print a larger one next.

Just a suggestion...…... check your drone battery. Drone low with battery will start blinking non-stop. Drone low in battery might not be able to connect with the transmitter.

Had a gap between the Bowden tube and the nozzle. U-tube tutorial helped me clear that out. Back in business.

Thank you. Right now it seems to me my Ender 3 is acting up. First thing first.

Unlike some stl files found in the net, this one is for "real."..….. hollow inside, not solid. Downside: Took over 10 hours to print, and it's only 3 inches tall. Nuts! My initial plan was to print a regular size first. If satisfactory, print a bigger size. Forget about that. Many "holes" were...

Inside the model, there was a cylindrical support from the bottom to the top. That, I suppose, is to keep the model in an upright position while printing. A little care needed when removing the bottom support without breaking it.

The object on the left of the screenshot is actually just a support during printing. It looks nice, so I am using it as a holder for the dragon egg. dragon egg on its holder...………………...

They may not be as "glamourous" as Superman, Batmen, Woverine, Mickey Mouse etc etc, but I can play with these.

No fun looking at a all black batman. Think I'll paint the bat logo at his chest and his belt both yellow. On this one, I wish I have the "stuff" to smooth the body. Maybe I was using the cheaper pla. No desire to print another one. Took more than 24 hrs.

Creality Ender 3 The power box has 2 input voltage options : 115 or 230. It was set at 230 and I have been using that. It's ok, I assume since I have printed at least half a dozen models since. Just to make sure.

Damn! I didn't know this was possible. Imagine the time I could have saved printing several different parts of the same model? Thank you.

Printer …………… Ender 3 Slicer...……………. Cura 4.3 I have a 3d model which consists of 2 different stl files. File 1 is the Top and File 2 is the Bottom. Question : Can I import both stl files to Cura and can Cura able to slice them at the same time ? Assuming the build bed is large enough for...

..................So I still don't get it why is it more than double the price in USD???...………………. It is because that particular product, for reason unknown, cannot be shipped to Canada, or probably cannot be shipped outside USA. Screenshot from Amazon.com...………………….. So...…. Amazon.ca...