Recent content by victorlaszlo

The engines work, they are just not spinning as fast as the remaining three.... Could try swapping with one of the good ones to rule out the board but the copter has never been running without engine connected. Cheers Victor

The other motor was identical with the first motor after having swapped the leads. Think they must have sent me a different engine type, or something else is wrong...

Yes, but, one motor (blue red) died and I got a replacement pair. Replaced the blue red one but the new engine is faulty, spins freely but not strongly enough. In the replacement kit there was a black white wired engine too and my thought was, to get my flying quickly, that if I swap it's...

So the CCW engine I have can be fitted in place of the CW engine if I swap the wires? Which is plus and minus, how does black and white relate to blue and red?

Very good idea - thanks! The rear right engine (M4) isn't lifting it. I suppose the engines are different? I got a blue-red wired and a black-white wired one in my repair kit. It's a blue-red wired engine that is having power problem (the one I replaced). The soldings seem fine so probably...

Hi all, new to the forum, happy to be here :) I have an X6 which after numerous indoor crashes had an engine blow out. I ordered a replacement engine and soldered it into place. After this it wouldn't take off at all, turn out I had but the propellers on the wrong way around. Swapping them...