Yes that's whats confused me. I'll have another go at it soon. If it doesn't work I think I will try removing the rx and flashing different firmwares until I can get it to work otherwise I don't know what this issue is. I assumed as I'd already flashed it with a taranis so that it was working in...
Having a bit of a nightmare connecting my XM+ receiver to my RadioMaster TX16S. I had the XM+ previously bound to a Taranis but am now trying to use my new controller with it. I hold the bind button while plugging the battery in and get a solid red and green LED i believe meaning it is bind...
For anyone with this issue you can solve it by pressing the middle up and left buttons on your camera remote whilst plugging in the battery. Hold for a few seconds and this will turn off your FOXEER OSD and should allow your Betaflight OSD to work again. Found the answer in the comments section...
FC: MAMBA F405 MK2 Betaflight Flight Controller
VTX: Rush Tank
Cam: Foxeer Predator V4 Mini Camera (1.8mm) (Red)
So I was upgrading my first build by switching out the camera and VTX so something a little fancier but I am now having trouble getting my original OSD back. The betaflight OSD...
Bit of an update. Managed to get the factory firmware from the supplier and flashed this on. Problem still occured and again the troubleshoot of connecting the vtx and camera wires together showed video in the goggles. Have ordered a new stack and so will add in the new flight controller when it...
Good idea I did think this and looked back on BF for the version but couldn't find it so didn't think that was something people did. Will try and contact them and see how it goes
reflashing to BF 4.2.1 to the FURYF4OSD target which i believe is the right one still does not get rid of the problem. Doing the same trouble shoot of connecting the camera and vtx wires directly allows the video to show but otherwise does not seem to work
I followed the recent Joshua Bardwell video series to set it up and flash it with betaflight 4.2.0. Come to think of it im pretty sure the camera sent video to the goggles before i flashed it. Once i'd wired everything up i wanted to test it and had the video working. I then went and followed...
Thank you for your help! Sorry I'm very new to this and don't have a multimeter to check for continuity. I have checked and ensured that the osd option is enabled. Is there anyway i can check the video out tab on the FC works without a multi meter. Surely it must be the tab that is the issue if...
Hello everyone, I am currently on my first build and ran into some video issues.
Kit: -MAMBA F405 MK2 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC
-JJA-CM1200 1/3 CMOS 1200TVL Mini FPV Camera 2.1mm Lens 16:9 PAL/NTSC Black/Red For RC Drone - Black NTSC
-Eachine...